| Part Number : GB511J3D22 | Manufacturer : Northrop Grumman Systems Corporation | ||
| NSN : 5305-01-158-7835 (5305011587835) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 26512 | ||
| NIIN : 01-158-7835 (011587835) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number GB511J3D22, that of which is listed with the description Screw Close Tolerance; Manufactured by Northrop Grumman Systems Corporation and listed alongside the NSN 5305011587835, part number GB511J3D22 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : GB511J3D22 | Manufacturer : Northrop Grumman Systems Corporation | ||
| NSN Number : 5305-01-158-7835 (5305011587835) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 26512 | ||
| NIIN : 011587835 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number GB511J3D22, that of which is listed with the description Screw Close Tolerance; Manufactured by Northrop Grumman Systems Corporation and listed alongside the NSN 5305011587835, part number GB511J3D22 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-158-7835 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 011587835 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HT193LB3H-22 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.323 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 1.698 INCHES MINIMUM AND 1.745 INCHES MAXIMUM |
| AASK | HEAD STYLE | PAN |
| AASL | HEAD DIAMETER | 0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.032 INCHES MINIMUM AND 0.042 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| ABQZ | INTERNAL DRIVE STYLE | HIGH-TORQUE |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| ANEE | GRIP LENGTH | 1.375 INCHES NOMINAL |
| ASXK | HOLE QUANTITY | 1 |
| BQDM | HOLE TYPE | DRILLED |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CQBC | MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| CRHC | HOLE CONFIGURATION STYLE | ROUND |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES BEARING SURFACE OF HEAD |
| CSYM | SURFACE FINISH | 63.0 MICROINCHES GRIP |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | NAVY SPECIAL PROJECT |
| MATT | MATERIAL | TITANIUM ALLOY UNS R54520 OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJC |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
