| Part Number : GB510FG8D28 | Manufacturer : Northrop Grumman Systems Corporation | ||
| NSN : 5305-01-355-6952 (5305013556952) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 26512 | ||
| NIIN : 01-355-6952 (013556952) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number GB510FG8D28, that of which is listed with the description Screw Close Tolerance; Manufactured by Northrop Grumman Systems Corporation and listed alongside the NSN 5305013556952, part number GB510FG8D28 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : GB510FG8D28 | Manufacturer : Northrop Grumman Systems Corporation | ||
| NSN Number : 5305-01-355-6952 (5305013556952) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 26512 | ||
| NIIN : 013556952 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number GB510FG8D28, that of which is listed with the description Screw Close Tolerance; Manufactured by Northrop Grumman Systems Corporation and listed alongside the NSN 5305013556952, part number GB510FG8D28 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-355-6952 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 013556952 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| GB510FG8D28 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| AASL | HEAD DIAMETER | 0.951 INCHES MINIMUM AND 1.014 INCHES MAXIMUM |
| CSYM | SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD32.0 MICROINCHES GRIP32.0 MICROINCHES THREADS |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AHYM | NOMINAL THREAD DIAMETER | 0.500 INCHES |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQBC | MINIMUM TENSILE STRENGTH | 220000 POUNDS PER SQUARE INCH |
| CRZS | DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 2.100 INCHES MINIMUM FIRST HOLE AND 2.152 INCHES MAXIMUM FIRST HOLE |
| AAJD | THREAD CLASS | 3A |
| AASA | THREAD LENGTH | 0.735 INCHES NOMINAL |
| AASB | FASTENER LENGTH | 2.475 INCHES MINIMUM AND 2.495 INCHES MAXIMUM |
| AAUR | GRIP DIAMETER | 0.4990 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM |
| AAWB | SHANK UNTHREADED HOLE DIAMETER | 0.101 INCHES MINIMUM FIRST HOLE AND 0.111 INCHES MAXIMUM FIRST HOLE |
| ABQZ | INTERNAL DRIVE STYLE | TORQUE-SET RIBBED |
| ANEE | GRIP LENGTH | 1.740 INCHES MINIMUM |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
