| Part Number : GN10FM25 | Manufacturer : Northrop Grumman Systems Corporation | ||
| NSN : 5310-01-077-8661 (5310010778661) | |||
| Item Name : Nut Plain Round | CAGE Code : 26512 | ||
| NIIN : 01-077-8661 (010778661) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 15887 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number GN10FM25, that of which is listed with the description Nut Plain Round; Manufactured by Northrop Grumman Systems Corporation and listed alongside the NSN 5310010778661, part number GN10FM25 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : GN10FM25 | Manufacturer : Northrop Grumman Systems Corporation | ||
| NSN Number : 5310-01-077-8661 (5310010778661) | |||
| Item Name : Nut Plain Round | CAGE Code : 26512 | ||
| NIIN : 010778661 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number GN10FM25, that of which is listed with the description Nut Plain Round; Manufactured by Northrop Grumman Systems Corporation and listed alongside the NSN 5310010778661, part number GN10FM25 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-01-077-8661 Item PartTypeName: NUT,PLAIN,ROUND | 5310 | 010778661 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| GN10FM25 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABQU | DRIVE POINT DEPTH | 0.110 INCHES MINIMUM AND 0.130 INCHES MAXIMUM |
| ACTA | NUT STYLE | ROUND |
| ACTD | NUT DIAMETER | 2.046 INCHES MINIMUM AND 2.078 INCHES MAXIMUM |
| ADBG | NUT THICKNESS | 0.328 INCHES MINIMUM AND 0.359 INCHES MAXIMUM |
| ADBH | DRIVE POINT WIDTH | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| ADBM | DRIVE POINT QUANTITY | 2 |
| BZRR | THREAD SERIES | UNJEF |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQJX | NOMINAL THREAD SIZE | 1.562 INCHES |
| CRSQ | COUNTERSINK ANGLE | 88.0 DEGREES MINIMUM BOTH ENDS AND 92.0 DEGREES MAXIMUM BOTH ENDS |
| FEAT | SPECIAL FEATURES | 3 HOLES EACH ON OPPOSITE FACES 120 DEG APART,0.045 IN. MIN 0.050 IN. MAX DIA AND DRILLED ON 45 DEG ANGLE |
| MATT | MATERIAL | ALUMINUM ALLOY 7075 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-225/9,T7351 FED SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | ANODIZE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-A-8625,TY 2,CL 1 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| ZZZK | SPECIFICATION/STANDARD DATA | 26512-GN10FM MANUFACTURERS STANDARD |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
