| Part Number : 1JA2375-5 | Manufacturer : Northrop Grumman Systems Corporation | ||
| NSN : 5340-00-616-4857 (5340006164857) | |||
| Item Name : Clamp Loop | CAGE Code : 97942 | ||
| NIIN : 00-616-4857 (006164857) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 17532 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 1JA23755 | |||
Thank you for taking an interest in part number 1JA2375-5, that of which is listed with the description Clamp Loop; Manufactured by Northrop Grumman Systems Corporation and listed alongside the NSN 5340006164857, part number 1JA2375-5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
4 c s welding lab inc
CAGE Code: 59685 |
3dfx interactive
CAGE Code: KA796 |
|
3s group inc
CAGE Code: 07CN0 |
3 ring inc
CAGE Code: 68310 |
|
1spatial ltd
CAGE Code: U3518 |
498 msug
CAGE Code: 5VW08 |
|
3m pharmaceuticals nz ltd
CAGE Code: EA139 |
259 holdings ltd
CAGE Code: 431P3 |
|
2 mb distribution
CAGE Code: FAH01 |
1 source electronic components inc
CAGE Code: 3FY68 |
|
3 y power technology inc
CAGE Code: 1XVP7 |
3m co abrasive systems division
CAGE Code: 078Z1 |
|
3m co engineering document systems
CAGE Code: 1BY21 |
60 degrees pharmaceuticals llc
CAGE Code: 71D06 |
|
3d evolution ltd
CAGE Code: KD959 |
| Part Number : 1JA2375-5 | Manufacturer : Northrop Grumman Systems Corporation | ||
| NSN Number : 5340-00-616-4857 (5340006164857) | |||
| Item Name : Clamp Loop | CAGE Code : 97942 | ||
| NIIN : 006164857 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 1JA2375-5, that of which is listed with the description Clamp Loop; Manufactured by Northrop Grumman Systems Corporation and listed alongside the NSN 5340006164857, part number 1JA2375-5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-616-4857 Item PartTypeName: CLAMP,LOOP | 5340 | 006164857 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1JA2375H05 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | HEAT |
| ABMK | OVERALL WIDTH | 0.625 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.172 INCHES NOMINAL AND 0.203 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.025 INCHES NOMINAL |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.562 INCHES NOMINAL |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 0.828 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 0.437 INCHES MINIMUM AND 0.625 INCHES MAXIMUM |
| MATT | MATERIAL | ALUMINUM ALLOY 2024 BAND |
| MATT | MATERIAL | RUBBER SYNTHETIC CUSHION |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-A-362,T4 FED SPEC SINGLE MATERIAL RESPONSE BAND |
| SFTT | SURFACE TREATMENT | ANODIZE BAND |
| STYL | STYLE DESIGNATOR | SINGLE LOOP |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
