| Part Number : A51L21079-29 | Manufacturer : Northrop Grumman Systems Corporation | ||
| NSN : 5340-01-042-5275 (5340010425275) | |||
| Item Name : Clamp Block Section | CAGE Code : 79RG9 | ||
| NIIN : 01-042-5275 (010425275) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 39404 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: A51L2107929 | |||
Thank you for taking an interest in part number A51L21079-29, that of which is listed with the description Clamp Block Section; Manufactured by Northrop Grumman Systems Corporation and listed alongside the NSN 5340010425275, part number A51L21079-29 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : A51L21079-29 | Manufacturer : Northrop Grumman Systems Corporation | ||
| NSN Number : 5340-01-042-5275 (5340010425275) | |||
| Item Name : Clamp Block Section | CAGE Code : 79RG9 | ||
| NIIN : 010425275 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number A51L21079-29, that of which is listed with the description Clamp Block Section; Manufactured by Northrop Grumman Systems Corporation and listed alongside the NSN 5340010425275, part number A51L21079-29 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-042-5275 Item PartTypeName: CLAMP,BLOCK,SECTION | 5340 | 010425275 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| A51L21079-29 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 2.375 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.380 INCHES NOMINAL |
| ABTB | MOUNTING HOLE DIAMETER | 0.190 INCHES MINIMUM AND 0.196 INCHES MAXIMUM |
| ABTJ | MOUNTING HOLE QUANTITY | 2 |
| AFEC | DISTANCE FROM CENTER OF MOUNTING HOLE TO EDGE ALONG THE WIDTH | 0.188 INCHES NOMINAL |
| AXPC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND MOUNTING HOLES | 1.875 INCHES NOMINAL |
| AZGM | MOUNTING FACILITY | UNTHREADED HOLE |
| BYGG | BLOCK HEIGHT | 0.315 INCHES NOMINAL |
| CWTD | CLAMPING HOLE QUANTITY | 3 |
| CWWM | CLAMPING HOLE DIAMETER | 0.250 INCHES MINIMUM FIRST HOLE AND 0.254 INCHES MAXIMUM FIRST HOLE |
| CWWM | CLAMPING HOLE DIAMETER | 0.250 INCHES MINIMUM THIRD HOLE AND 0.254 INCHES MAXIMUM THIRD HOLE |
| CWWM | CLAMPING HOLE DIAMETER | 0.376 INCHES MINIMUM SECOND HOLE AND 0.380 INCHES MAXIMUM SECOND HOLE |
| CWXC | DISTANCE FROM END TO FIRST MOUNTING HOLE CENTER | 0.250 INCHES NOMINAL |
| CWXN | DISTANCE FROM END TO FIRST CLAMPING HOLE CENTER | 0.562 INCHES NOMINAL |
| CWXZ | CENTER TO CENTER DISTANCE BETWEEN FIRST AND SECOND CLAMPING HOLES | 0.571 INCHES NOMINAL |
| CWYC | CENTER TO CENTER DISTANCE BETWEEN FIRST AND THIRD CLAMPING HOLES | 1.188 INCHES NOMINAL |
| MATT | MATERIAL | PLASTIC |
| STYL | STYLE DESIGNATOR | RECTANGULAR |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
