| Part Number : 123CM10079-1 | Manufacturer : Northrop Grumman Technical Services Inc | ||
| NSN : 3110-00-040-8930 (3110000408930) | |||
| Item Name : Bearing Ball Rod En | CAGE Code : 59U82 | ||
| NIIN : 00-040-8930 (000408930) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00049 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 123CM100791 | |||
Thank you for taking an interest in part number 123CM10079-1, that of which is listed with the description Bearing Ball Rod En; Manufactured by Northrop Grumman Technical Services Inc and listed alongside the NSN 3110000408930, part number 123CM10079-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 123CM10079-1 | Manufacturer : Northrop Grumman Technical Services Inc | ||
| NSN Number : 3110-00-040-8930 (3110000408930) | |||
| Item Name : Bearing Ball Rod En | CAGE Code : 59U82 | ||
| NIIN : 000408930 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 123CM10079-1, that of which is listed with the description Bearing Ball Rod En; Manufactured by Northrop Grumman Technical Services Inc and listed alongside the NSN 3110000408930, part number 123CM10079-1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-040-8930 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 000408930 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 123CM10079-1 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM |
| AAZF | SHANK STYLE | INTERNALLY THREADED W/HEXAGON END |
| ABHP | OVERALL LENGTH | 1.9375 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.2497 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.9280 INCHES MINIMUM AND 0.9480 INCHES MAXIMUM |
| AGGY | SHANK THREAD LENGTH | 0.7500 INCHES NOMINAL |
| AGVT | OUTER RING WIDTH | 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.4590 INCHES MINIMUM AND 1.4790 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| ASDB | WIDTH ACROSS FLATS | 0.4375 INCHES NOMINAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | 0.312 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | TWO SLOTS ACROSS FLATS 0.0800 IN. W,0.0620 IN. DEEP |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MATT | MATERIAL | STEEL ROD END BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
