| Part Number : S3509E100 | Manufacturer : Nsk Corp | ||
| NSN : 3110-00-991-0944 (3110009910944) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 53035 | ||
| NIIN : 00-991-0944 (009910944) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00014 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number S3509E100, that of which is listed with the description Bearing Ball Annular; Manufactured by Nsk Corp and listed alongside the NSN 3110009910944, part number S3509E100 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m health care service center
CAGE Code: 0UTW7 |
3m alaska
CAGE Code: 0NZU5 |
|
3m belgium nv
CAGE Code: B2281 |
4 ld inc
CAGE Code: 0ACW5 |
|
3m unitek corporation
CAGE Code: 90444 |
21st century enterprises inc
CAGE Code: 56589 |
|
3d evolution ltd
CAGE Code: KD959 |
3m singapore pte ltd
CAGE Code: QA095 |
|
526th emxs fabrication
CAGE Code: 69XG4 |
3 d machining inc
CAGE Code: 09SY7 |
|
3m company
CAGE Code: 04963,06EF6,07WQ0,0G8N4,0J8T2,0K0U5,0KHE0,0KHE3,0L3U7,0R8C0,0T1L6,0TS02,0WJ98,0YMX0,1A9T3,1CHB0,1CM57,1DWR5,1E494,1K616,1LF36,1QDV5,27293,28112,28124,28156,28217,2H942,2K194,2V131,2Y823,34359,34360,3HUC7,50378,52152,52157,53387,54681,55203,69892,6A670,6H360,6L367,76381,7U948,94960,94962,9L291 |
2m machining and manufacturing
CAGE Code: 6Y604 |
|
20th century fiberglass
CAGE Code: 80241 |
3 l filters ltd
CAGE Code: 37941 |
|
2709th af vehicle control group
CAGE Code: 10994 |
| Part Number : S3509E100 | Manufacturer : Nsk Corp | ||
| NSN Number : 3110-00-991-0944 (3110009910944) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 53035 | ||
| NIIN : 009910944 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number S3509E100, that of which is listed with the description Bearing Ball Annular; Manufactured by Nsk Corp and listed alongside the NSN 3110009910944, part number S3509E100 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-991-0944 Item PartTypeName: BEARING,BALL,ANNULAR | 3110 | 009910944 | X | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| 7 | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1JH125SUB4PC11 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 1.1855 INCHES MINIMUM AND 1.1875 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 1.7715 INCHES MINIMUM AND 1.7717 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 3.3463 INCHES MINIMUM AND 3.3465 INCHES MAXIMUM |
| ADZG | UNABLE TO DECODE | UNABLE TO DECODE |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | LIPS TURNED OUTWARDLY |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AGZH | INTERNAL FIT-UP DESIGNATION | TIGHT |
| AKVV | INTERNAL CLEARANCE | 0.0005 INCHES MINIMUM RADIAL AND 0.0009 INCHES MAXIMUM RADIAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-18709 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MATT | MATERIAL | STEEL RETAINER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING |
| STYL | STYLE DESIGNATOR | NON-LOADING GROOVE,NON-SEPARABLE |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | 120 TYPE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
