| Part Number : 194D | Manufacturer : Oliver Machinery Co | ||
| NSN : 3220-01-372-8676 (3220013728676) | |||
| Item Name : Mortiser Hollow Chisel Horizonta | CAGE Code : 44769 | ||
| NIIN : 01-372-8676 (013728676) | |||
| FSC Code : 3220 Woodworking Machines | |||
| FSG Code : 32 Woodworking Machinery and Equipment | |||
| INC Code : 07444 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 194D, that of which is listed with the description Mortiser Hollow Chisel Horizonta; Manufactured by Oliver Machinery Co and listed alongside the NSN 3220013728676, part number 194D is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 194D | Manufacturer : Oliver Machinery Co | ||
| NSN Number : 3220-01-372-8676 (3220013728676) | |||
| Item Name : Mortiser Hollow Chisel Horizonta | CAGE Code : 44769 | ||
| NIIN : 013728676 | |||
| FSC CODE : 3220 Woodworking Machines | |||
Thank you for taking an interest in part number 194D, that of which is listed with the description Mortiser Hollow Chisel Horizonta; Manufactured by Oliver Machinery Co and listed alongside the NSN 3220013728676, part number 194D is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3220-01-372-8676 Item Description: Mortiser Hollow Chisel Horizonta | 3220 | 013728676 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 194d | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AMWX | FEED METHOD | HAND |
| ELEC | VOLTAGE IN VOLTS | 115.0 |
| FAAZ | PHASE | SINGLE |
| AKYN | FURNISHED ITEMS AND QUANTITY | MAGNETIC CONTROL 1; TABLE CLAMP 1 |
| ASQQ | HORSEPOWER RATING | 1.00 |
| BCRH | SPINDLE QUANTITY | 1 |
| BCRQ | MAXIMUM DISTANCE FROM FENCE TO CHISEL CENTER | 4.000 INCHES |
| FEAT | SPECIAL FEATURES | TABLE CAN BE LOWERED BY MEANS OF A HANDWHEEL AND SCREW,TO PERMIT MORTISING IN THE EDGE OF STOCK 7 UP TO 20 IN. WIDE WHEN USING THE TABLE. THE TABLE KNEE,WITH THE TABLE ATTACHED,CAN BE REMOVED FROM THE MACHINE IN FIVE MINUTES. WITH THE TABLE REMOVED THE MACHINE WILL MORTISE IN THE END OF STOCK UP TO 32 IN. WIDE. TABLE TRAVEL IS 9 IN. HORIZONTALLY. THE MOTOR HEAD SLIDES ON V-WAYS SCRAPED TO CLOSE TOLERANCES,AFTER ACCURATE PLANING. THE WAYS HAVE GIBS WITH SET SCREWS TO TAKE UP POSSIBLE FUTURE WEAR. THREE SLIDES ARE LOCATED ON THE VERTICAL WAYS. THE MOTOR IS CARRIES ON ONE SLIDE; THE M9OTOR IS EQUIPPED WITH TRUST BALL BEARING TO HANDLE THRUST OF THE BIT; MOTOR IS 3600 RPM |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ATJK | POWER SOURCE | ELECTRIC MOTOR |
| ACDC | CURRENT TYPE | AC |
| ARDQ | TABLE LENGTH | 28.000 INCHES NOMINAL |
| BCRL | MAXIMUM CHISEL SIZE ACCOMMODATED | 0.375 INCHES |
| BCRP | MAXIMUM DISTANCE FROM TABLE TO HORIZONTAL CHISEL CENTERLINE | 20.000 INCHES |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
