| Part Number : 1334-MIL | Manufacturer : Omatech Service Ltd | ||
| NSN : 3416-01-030-8195 (3416010308195) | |||
| Item Name : Lathe Engine | CAGE Code : 0B6Z5 | ||
| NIIN : 01-030-8195 (010308195) | |||
| FSC Code : 3416 Lathes | |||
| FSG Code : 34 Metalworking Machinery | |||
| INC Code : 03137 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 1334MIL | |||
Thank you for taking an interest in part number 1334-MIL, that of which is listed with the description Lathe Engine; Manufactured by Omatech Service Ltd and listed alongside the NSN 3416010308195, part number 1334-MIL is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 1334-MIL | Manufacturer : Omatech Service Ltd | ||
| NSN Number : 3416-01-030-8195 (3416010308195) | |||
| Item Name : Lathe Engine | CAGE Code : 0B6Z5 | ||
| NIIN : 010308195 | |||
| FSC CODE : 3416 Lathes | |||
Thank you for taking an interest in part number 1334-MIL, that of which is listed with the description Lathe Engine; Manufactured by Omatech Service Ltd and listed alongside the NSN 3416010308195, part number 1334-MIL is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| ELEC | Voltage In Volts | 115.0 AND 230.0 |
| AGLD | Performance Type | STANDARD DUTY |
| MRC | Decoded Requirement | Clear Text Reply |
| FAAZ | Phase | SINGLE |
| AWHA | Bed Type | SOLID |
| ACDC | Current Type | AC |
| AKSL | Purpose For Which Designed | GENERAL |
| FREQ | Frequency In Hertz | 60 |
| BTTF | Actual Swing Over Bed | 13.000 INCHES NOMINAL |
| BTYP | Hole Diameter Through Spindle | 1.375 INCHES NOMINAL |
| BTYW | Gear Change Type | QUICK |
| AAXX | Mounting Type | FLOOR |
| ADQR | Center To Center Distance | 30.000 INCHES MINIMUM |
| AKYD | Accessory Components And Quantity | 2 NO.3 MORSE TAPER LATHE CENTERS,3 CHUCKS,1 FLEXIBLE RUBBER COLLET SET,5 BENT TAIL DOG LATHES,1 DOG LATHE,1 DRIVE PLATE,1 FACEPLATE,1 METRIC TRANSPOSING GEAR LATHE,1 BORING BAR CUTTING TOOL HOLDER,3 CUTTING-OFF CUTTING TOOL HOLDERS,3 TURNING CUTTING TOOL HOLDERS,1 V-FORM THREADING TOOL HOLDER,1 KNURLING TOOLS,4 COLLET PLUGS,2 LATHE RESTS,1 LATHE CENTER SLEEVE,1 MICROMETER LATHE CARRIAGE STOP,1 TELESCOPIC LATHE TAPEP ATTACHMENT |
| FEAT | Special Features | 1400 LBS.MAX NET WT OF LATHE; FLOOR CABINET DESIGNED FOR STOWAGE OF ALL ACCESSORIES |
| APGF | Design Type | SCREW |
| BTTD | Rated Swing | 13.000 INCHES NOMINAL |
| BTTG | Swing Over Cross Slide | 7.750 INCHES NOMINAL |
| BTWM | Headstock Center Taper Size Designator | 3 MORSE |
| BTYQ | Carriage Quantity | 1 |
| BTYT | Carriage Feed Change Quantity | 48 |
| BTZR | Thread Quantity Range | +4.0/+80.0 PER INCH |
| BTSZ | Spindle Speed Quantity | 12 |
| BTTB | Spindle Speed Range In Rpm | 0.029444444 |
| BTWB | Thread Change Quantity | 48 |
| BTWL | Headstock Drive Type | STEP CONE PULLEY, BACK GEARED |
| BTYR | Carriage Longitudinal Feed Operation Method | HAND AND POWER |
| BTYS | Carriage Cross Feed Operation Method | HAND AND POWER |
| AWLX | Electric Motor Quantity | 1 |
| ASHK | Electric Motor Horsepower Rating | 1.5 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
