| Part Number : 26-MIL | Manufacturer : Omatech Service Ltd | ||
| NSN : 3416-01-034-1257 (3416010341257) | |||
| Item Name : Lathe Engine | CAGE Code : 0B6Z5 | ||
| NIIN : 01-034-1257 (010341257) | |||
| FSC Code : 3416 Lathes | |||
| FSG Code : 34 Metalworking Machinery | |||
| INC Code : 03137 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 26MIL | |||
Thank you for taking an interest in part number 26-MIL, that of which is listed with the description Lathe Engine; Manufactured by Omatech Service Ltd and listed alongside the NSN 3416010341257, part number 26-MIL is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 26-MIL | Manufacturer : Omatech Service Ltd | ||
| NSN Number : 3416-01-034-1257 (3416010341257) | |||
| Item Name : Lathe Engine | CAGE Code : 0B6Z5 | ||
| NIIN : 010341257 | |||
| FSC CODE : 3416 Lathes | |||
Thank you for taking an interest in part number 26-MIL, that of which is listed with the description Lathe Engine; Manufactured by Omatech Service Ltd and listed alongside the NSN 3416010341257, part number 26-MIL is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| AGLD | Performance Type | LIGHT DUTY |
| ELEC | Voltage In Volts | 220.0 AND 440.0 |
| MRC | Decoded Requirement | Clear Text Reply |
| FREQ | Frequency In Hertz | 50.0 AND 60.0 |
| AWHA | Bed Type | SOLID |
| BTTB | Spindle Speed Range In Rpm | 0.025 |
| FAAZ | Phase | THREE |
| AAXX | Mounting Type | BENCH OR FLOOR |
| AKYD | Accessory Components And Quantity | 1 STOP,CARRIAGE,MICROMETER,1 STOP,THREAD CUTTING,1 INDICATOR,THREAD,1 TAPER ATTACHMENT,1 SET GEARS,1BAG,1 COVER,CANVAS,1 SET WRENCHES,1 WRENCH SPANNER,1 WRENCH,TOOL POST,1 ADAPTER HEADSTOCK,1 ADAPTER,TAILSTOCK,1 CHUCK,3-JAW UNIVERSAL,1 CHUCK4 JAW INDEPENDENT,1 CHUCK,COLLET,1 SET COLLETS,1 CHUCK DRILL,1 FACEPLATE,12 INCH DIAMETER,1 FACEPLATE,24 INCH DIAMETER,2 LATHE CENTERS,1 SET DOG LATHE,1 DOG LATHE,1 STEADYREST,3 SOCKETS,TAPER SHANK TOOL,1 SET DRIFT,DRILL,1 SET TOOL POST,LATHE,1 KNURLING TOOL,2 HOLDERS,3/8 INCH SQUARECUTTER BIT RIGHT AND LEFT HAND TURNING,2 HOLDERS,1/8 X 7/8 INCH CUT-OFF BLADE,RIGHT AND LEFT HAND OFFSET,1 HOLDER,BORING BAR,1 BORING BAR,ROUND,1/2 INCH DIAMETER,1 BORING BAR ROUND,3/4 INCH DIAMETER,1 BORING BAR,ROUND,1-1/8 INCH DIAMETER,3 KNURLING SETS |
| BTSZ | Spindle Speed Quantity | 12 |
| BTTD | Rated Swing | 25.000 INCHES NOMINAL |
| BTYP | Hole Diameter Through Spindle | 3.000 INCHES MINIMUM |
| AWLX | Electric Motor Quantity | 1 |
| BTTF | Actual Swing Over Bed | 25.000 INCHES NOMINAL |
| BTTG | Swing Over Cross Slide | 18.000 INCHES NOMINAL |
| ASHK | Electric Motor Horsepower Rating | 5 |
| ADQR | Center To Center Distance | 30.000 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
