| Part Number : 1334-MOD | Manufacturer : Omatech Service Ltd | ||
| NSN : 3416-01-037-2169 (3416010372169) | |||
| Item Name : Lathe Engine | CAGE Code : 0B6Z5 | ||
| NIIN : 01-037-2169 (010372169) | |||
| FSC Code : 3416 Lathes | |||
| FSG Code : 34 Metalworking Machinery | |||
| INC Code : 03137 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 1334MOD | |||
Thank you for taking an interest in part number 1334-MOD, that of which is listed with the description Lathe Engine; Manufactured by Omatech Service Ltd and listed alongside the NSN 3416010372169, part number 1334-MOD is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 1334-MOD | Manufacturer : Omatech Service Ltd | ||
| NSN Number : 3416-01-037-2169 (3416010372169) | |||
| Item Name : Lathe Engine | CAGE Code : 0B6Z5 | ||
| NIIN : 010372169 | |||
| FSC CODE : 3416 Lathes | |||
Thank you for taking an interest in part number 1334-MOD, that of which is listed with the description Lathe Engine; Manufactured by Omatech Service Ltd and listed alongside the NSN 3416010372169, part number 1334-MOD is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| AGLD | Performance Type | STANDARD DUTY |
| FAAZ | Phase | THREE |
| AWHA | Bed Type | SOLID |
| ACDC | Current Type | AC |
| AKSL | Purpose For Which Designed | GENERAL |
| ELEC | Voltage In Volts | 230 |
| FREQ | Frequency In Hertz | 60 |
| BTTF | Actual Swing Over Bed | 13.000 INCHES NOMINAL |
| BTYP | Hole Diameter Through Spindle | 1.375 INCHES NOMINAL |
| BTZR | Thread Quantity Range | +4.0/+224.0 PER INCH |
| AAXX | Mounting Type | BENCH |
| ADQR | Center To Center Distance | 30.000 INCHES MINIMUM |
| AKYD | Accessory Components And Quantity | 2 CENTER,LATHE NO.3 MORSE TAPER;1 CHUCK,COLLET,SPINDLE NOSE 1/16THRU1-3/8 IN;1 CHUCK,DRILL 1/16THRU1/2,NO.3 MORSE TAPER SHANK;1 CHUCK,4-JAW,IND.10 IN.DIA;1 CHUCK,3-JAW,UNIV.,8 IN.DIA;1 COLLET SET,FLEX RUBBER 1/16THRU 1 IN;1 EA,DOG,LATHE BENT TAIL 1/2,3/4,1,1-1/4,1-1/2,1-3/4;1 DRIVE PLATE 6-1/2 IN.DIA;1 FACEPLATE LG 12 IN.DIA;1 GEAR SET,LATHE METRIC TRANSPOSING;1 HOLDER CUTTING TOOL BORING BAR;1 EA,HOLDER CUTTING TOOL CUT-OFF,LH,RH,STRAIGHT;1 EA,HOLDER,CUTTING TOOL TURNING,LH,RH,STRAIGHT;1 HOLDER THREADING TOOL 60 DEG SHARP V-FORM;1 KNURLING TOOL,SELF-CTR LATHE W/3 PR.KNURLS DIAMOND PATTERN;1 EA,PLUG,COLLET RUBBER 1/8TO3/8,1/2TO5/8,3/4TO7/8,1TO1-1/8 IN;1 EA,REST,FOLLOWER,STEADY LATHE;1 SLEEVE CTR;1 STOP CARRIAGE LATHE MICROMETER,1 TAPER ATTACHMENT LATHE TELESCOPIC |
| APGF | Design Type | SCREW |
| BTTD | Rated Swing | 13.000 INCHES NOMINAL |
| BTTG | Swing Over Cross Slide | 7.750 INCHES NOMINAL |
| BTWM | Headstock Center Taper Size Designator | 3 MORSE |
| BTYQ | Carriage Quantity | 1 |
| BTYW | Gear Change Type | QUICK |
| MRC | Decoded Requirement | Clear Text Reply |
| BTSZ | Spindle Speed Quantity | 12 |
| BTTB | Spindle Speed Range In Rpm | 0.029444444 |
| BTWB | Thread Change Quantity | 48 |
| BTWL | Headstock Drive Type | DIRECT PULLEY, BACK GEARED |
| BTYR | Carriage Longitudinal Feed Operation Method | POWER |
| BTYS | Carriage Cross Feed Operation Method | POWER |
| AWLX | Electric Motor Quantity | 1 |
| ASHK | Electric Motor Horsepower Rating | 1.25 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
