| Part Number : 1648G | Manufacturer : Oshkosh Corporation | ||
| NSN : 2520-00-554-7856 (2520005547856) | |||
| Item Name : Shaft Axle Automoti | CAGE Code : 75Q65 | ||
| NIIN : 00-554-7856 (005547856) | |||
| FSC Code : 2520 Vehicular Power Transmission Components | |||
| FSG Code : 25 Vehicular Equipment Components | |||
| INC Code : 10852 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 1648G, that of which is listed with the description Shaft Axle Automoti; Manufactured by Oshkosh Corporation and listed alongside the NSN 2520005547856, part number 1648G is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 1648G | Manufacturer : Oshkosh Corporation | ||
| NSN Number : 2520-00-554-7856 (2520005547856) | |||
| Item Name : Shaft Axle Automoti | CAGE Code : 75Q65 | ||
| NIIN : 005547856 | |||
| FSC CODE : 2520 Vehicular Power Transmission Components | |||
Thank you for taking an interest in part number 1648G, that of which is listed with the description Shaft Axle Automoti; Manufactured by Oshkosh Corporation and listed alongside the NSN 2520005547856, part number 1648G is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 2520-00-554-7856 Item PartTypeName: SHAFT,AXLE,AUTOMOTIVE | 2520 | 005547856 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 1648G | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 41.500 INCHES NOMINAL |
| AMDM | FIRST END SPLINE LENGTH | 3.438 INCHES NOMINAL |
| AMDN | FIRST END SPLINE MINOR DIAMETER | 2.595 INCHES MINIMUM AND 2.600 INCHES MAXIMUM |
| AMDP | FIRST END SPLINE MAJOR DIAMETER | 2.952 INCHES MINIMUM AND 2.960 INCHES MAXIMUM |
| AMGA | SECOND END SPLINE LENGTH | 3.250 INCHES NOMINAL |
| AMGB | SECOND END SPLINE MINOR DIAMETER | 2.595 INCHES MINIMUM AND 2.600 INCHES MAXIMUM |
| AMGC | SECOND END SPLINE MAJOR DIAMETER | 2.952 INCHES MINIMUM AND 2.960 INCHES MAXIMUM |
| AMQA | FIRST END TYPE | SPLINED |
| AMQF | SECOND END TYPE | SPLINED |
| BBCD | FIRST END SPLINE QUANTITY | 10 |
| BBCF | SECOND END SPLINE QUANTITY | 10 |
| BNPK | SECOND END FACILITY DIAMETER | 2.998 INCHES MINIMUM AND 3.002 INCHES MAXIMUM |
| BNTF | FIRST END BEARING SEAT | NOT INCLUDED |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| BNTQ | SECOND END ENGAGING/LOCKING/POSITIONING FACILITY | SHOULDER |
| BNTR | SECOND END FACILITY WIDTH | 2.250 INCHES NOMINAL |
| BNTS | SECOND END FACILITY LOCATION | 6-1/4 IN. FROM SHAFT END |
| BNTT | SECOND END BEARING SEAT | NOT INCLUDED |
| BNYX | FIRST END SPLINE TYPE | STRAIGHT |
| MATL | UNABLE TO DECODE | UNABLE TO DECODE |
| MATT | MATERIAL | STEEL COMP 4340 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI 4340 ASSN STD SINGLE MATERIAL RESPONSE OR SAE 4340 ASSN STD SINGLE MATERIAL RESPONSE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
