| Part Number : 201-365PC61 | Manufacturer : Otis Elevator Co | ||
| NSN : 3130-00-151-9659 (3130001519659) | |||
| Item Name : Bearing Unit Roller | CAGE Code : 45206 | ||
| NIIN : 00-151-9659 (001519659) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30558 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 201365PC61 | |||
Thank you for taking an interest in part number 201-365PC61, that of which is listed with the description Bearing Unit Roller; Manufactured by Otis Elevator Co and listed alongside the NSN 3130001519659, part number 201-365PC61 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 201-365PC61 | Manufacturer : Otis Elevator Co | ||
| NSN Number : 3130-00-151-9659 (3130001519659) | |||
| Item Name : Bearing Unit Roller | CAGE Code : 45206 | ||
| NIIN : 001519659 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number 201-365PC61, that of which is listed with the description Bearing Unit Roller; Manufactured by Otis Elevator Co and listed alongside the NSN 3130001519659, part number 201-365PC61 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-00-151-9659 Item PartTypeName: BEARING UNIT,ROLLER | 3130 | 001519659 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 201-353PC8 | 2 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | 0.5000 INCHES NOMINAL |
| ABVG | MOUNTING SLOT LENGTH | 0.8125 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.2500 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 0.8750 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 4.7500 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 3.4375 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 6.3125 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | 2.1250 INCHES NOMINAL |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 2.6875 INCHES NOMINAL |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 1.7500 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 30.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK,SOLID |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
