| Part Number : 926D-128 | Manufacturer : Pep West Inc | ||
| NSN : 5340-01-185-1954 (5340011851954) | |||
| Item Name : Clamp Loop | CAGE Code : 61081 | ||
| NIIN : 01-185-1954 (011851954) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 17532 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 926D128 | |||
Thank you for taking an interest in part number 926D-128, that of which is listed with the description Clamp Loop; Manufactured by Pep West Inc and listed alongside the NSN 5340011851954, part number 926D-128 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 926D-128 | Manufacturer : Pep West Inc | ||
| NSN Number : 5340-01-185-1954 (5340011851954) | |||
| Item Name : Clamp Loop | CAGE Code : 61081 | ||
| NIIN : 011851954 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number 926D-128, that of which is listed with the description Clamp Loop; Manufactured by Pep West Inc and listed alongside the NSN 5340011851954, part number 926D-128 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-01-185-1954 Item PartTypeName: CLAMP,LOOP | 5340 | 011851954 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 926D128 | 5 | 1 | C | A |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | OBLONG |
| ABGC | SLOT WIDTH | 0.166 INCHES NOMINAL |
| ABGD | SLOT LENGTH | 0.312 INCHES NOMINAL |
| ABMK | OVERALL WIDTH | 0.375 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.025 INCHES NOMINAL |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 1.062 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 1.530 INCHES NOMINAL |
| FEAT | SPECIAL FEATURES | TWO BRACKETS ATTACHED TO OD; FOUR SPURS,WIRE LOOP AND CLIP |
| MATT | MATERIAL | STEEL COMP 302 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
