| Part Number : 2152904 | Manufacturer : Piezo Crystal Co | ||
| NSN : 5955-00-238-2890 (5955002382890) | |||
| Item Name : Crystal Unit Quartz | CAGE Code : 74306 | ||
| NIIN : 00-238-2890 (002382890) | |||
| FSC Code : 5955 Oscillators and Piezoelectric Crystals | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 00196 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 2152904, that of which is listed with the description Crystal Unit Quartz; Manufactured by Piezo Crystal Co and listed alongside the NSN 5955002382890, part number 2152904 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 2152904 | Manufacturer : Piezo Crystal Co | ||
| NSN Number : 5955-00-238-2890 (5955002382890) | |||
| Item Name : Crystal Unit Quartz | CAGE Code : 74306 | ||
| NIIN : 002382890 | |||
| FSC CODE : 5955 Oscillators and Piezoelectric Crystals | |||
Thank you for taking an interest in part number 2152904, that of which is listed with the description Crystal Unit Quartz; Manufactured by Piezo Crystal Co and listed alongside the NSN 5955002382890, part number 2152904 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5955-00-238-2890 Item PartTypeName: CRYSTAL UNIT,QUARTZ | 5955 | 002382890 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 2152904 | 2 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 0.810 INCHES MAXIMUM |
| ABMK | OVERALL WIDTH | 0.757 INCHES MAXIMUM |
| ADUM | OVERALL THICKNESS | 0.350 INCHES MAXIMUM |
| AEHC | MODE OF OSCILLATION | FUNDAMENTAL |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | 0.575 NOMINAL AND 0.565 MINIMUM AND 0.585 MAXIMUM |
| AEHK | FREQUENCY TOLERANCE AT REFERENCE TEMP IN PERCENT | -0.002 TO 0.002 |
| AEHM | CONTROLLED REFERENCE TEMP | 25.0 DEG CELSIUS |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.490 INCHES NOMINAL |
| AFGA | OPERATING TEMP RANGE | -55.0 TO 100.0 DEG CELSIUS |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.005 TO 0.005 AND-0.0010 TO 0.0010 |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | 5000.0 MINIMUM AND 5300.0 MAXIMUM |
| TEST | TEST DATA DOCUMENT | 97942-581R332H01 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING D |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
