| Part Number : 136915 | Manufacturer : Pratt And Whitney Canada Inc | ||
| NSN : 5310-00-095-3409 (5310000953409) | |||
| Item Name : Nut Plain Round | CAGE Code : 00198 | ||
| NIIN : 00-095-3409 (000953409) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 15887 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 136915, that of which is listed with the description Nut Plain Round; Manufactured by Pratt And Whitney Canada Inc and listed alongside the NSN 5310000953409, part number 136915 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 136915 | Manufacturer : Pratt And Whitney Canada Inc | ||
| NSN Number : 5310-00-095-3409 (5310000953409) | |||
| Item Name : Nut Plain Round | CAGE Code : 00198 | ||
| NIIN : 000953409 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number 136915, that of which is listed with the description Nut Plain Round; Manufactured by Pratt And Whitney Canada Inc and listed alongside the NSN 5310000953409, part number 136915 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-095-3409 Item PartTypeName: NUT,PLAIN,ROUND | 5310 | 000953409 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 136915 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJE | THREAD PITCH DIAMETERS | 1.1604/1.1644 INCHES |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ABPH | SMALL END DIAMETER | 1.590 INCHES MINIMUM AND 1.610 INCHES MAXIMUM |
| ABQU | DRIVE POINT DEPTH | 0.281 INCHES NOMINAL |
| ACTA | NUT STYLE | ROUND |
| ACTD | NUT DIAMETER | 1.990 INCHES MINIMUM AND 2.010 INCHES MAXIMUM |
| ADBG | NUT THICKNESS | 0.300 INCHES MINIMUM AND 0.320 INCHES MAXIMUM |
| ADBH | DRIVE POINT WIDTH | 0.178 NOMINAL MILS AND 0.198 NOMINAL CENTIMETERS |
| ADBJ | UNDERCUT THICKNESS | 0.230 NOMINAL MILS AND 0.270 NOMINAL CENTIMETERS |
| ADBM | DRIVE POINT QUANTITY | 6 |
| AGGP | DRILLED HOLE DIAMETER | 0.084 INCHES NOMINAL |
| ALET | HOLE TYPE AND QUANTITY | 6 DRILLED |
| BZRR | THREAD SERIES | UNS |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQFM | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM AND 38.0 ROCKWELL C MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 1.188 INCHES |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION F |
| CRSQ | COUNTERSINK ANGLE | 89.0 DEGREES MINIMUM NUT AND 92.0 DEGREES MAXIMUM NUT |
| MATT | MATERIAL | STEEL COMP 8740 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS 6323 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
