| Part Number : 3012387 | Manufacturer : Pratt And Whitney Canada Inc | ||
| NSN : 5310-00-753-5374 (5310007535374) | |||
| Item Name : Nut Plain Hexagon | CAGE Code : 00198 | ||
| NIIN : 00-753-5374 (007535374) | |||
| FSC Code : 5310 Nuts and Washers | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 01857 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 3012387, that of which is listed with the description Nut Plain Hexagon; Manufactured by Pratt And Whitney Canada Inc and listed alongside the NSN 5310007535374, part number 3012387 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 3012387 | Manufacturer : Pratt And Whitney Canada Inc | ||
| NSN Number : 5310-00-753-5374 (5310007535374) | |||
| Item Name : Nut Plain Hexagon | CAGE Code : 00198 | ||
| NIIN : 007535374 | |||
| FSC CODE : 5310 Nuts and Washers | |||
Thank you for taking an interest in part number 3012387, that of which is listed with the description Nut Plain Hexagon; Manufactured by Pratt And Whitney Canada Inc and listed alongside the NSN 5310007535374, part number 3012387 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5310-00-753-5374 Item PartTypeName: NUT,PLAIN,HEXAGON | 5310 | 007535374 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3012387 | 2 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| ACTA | NUT STYLE | HEXAGON |
| AAJD | THREAD CLASS | 3B |
| ADEA | NUT HEIGHT | 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM |
| AGGP | DRILLED HOLE DIAMETER | 0.050 INCHES NOMINAL |
| ALET | HOLE TYPE AND QUANTITY | 2 DRILLED |
| ASDB | WIDTH ACROSS FLATS | 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM |
| BZRR | THREAD SERIES | UNF |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQFM | HARDNESS RATING | 19.0 ROCKWELL C MINIMUM AND 26.0 ROCKWELL C MAXIMUM |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES |
| CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION B |
| CRSQ | COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT |
| CRTM | BEARING SURFACE TYPE | CHAMFERED |
| FEAT | SPECIAL FEATURES | NUT COUNTERSUNK AND CHAMFERED BOTH ENDS |
| MATT | MATERIAL | STEEL COMP 8740 OVERALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | AMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
