| Part Number : 13084180 | Manufacturer : Program Manager Advanced Attack | ||
| NSN : 3110-01-183-4094 (3110011834094) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 58260 | ||
| NIIN : 01-183-4094 (011834094) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30213 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 13084180, that of which is listed with the description Bearing Ball Duplex; Manufactured by Program Manager Advanced Attack and listed alongside the NSN 3110011834094, part number 13084180 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 13084180 | Manufacturer : Program Manager Advanced Attack | ||
| NSN Number : 3110-01-183-4094 (3110011834094) | |||
| Item Name : Bearing Ball Duplex | CAGE Code : 58260 | ||
| NIIN : 011834094 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number 13084180, that of which is listed with the description Bearing Ball Duplex; Manufactured by Program Manager Advanced Attack and listed alongside the NSN 3110011834094, part number 13084180 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-183-4094 Item PartTypeName: BEARING,BALL,DUPLEX | 3110 | 011834094 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3TAR29-36-SU-DB65/85 LYVC-254 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABMK | OVERALL WIDTH | 0.4900 INCHES MINIMUM AND 0.5100 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 1.8122 INCHES MINIMUM AND 1.8125 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 2.2497 INCHES MINIMUM AND 2.2500 INCHES MAXIMUM |
| ADZG | LUBRICATION MATERIAL | OIL |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | ANGULAR |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO.7 |
| CTHQ | BEARING PRELOAD RATING | 65.0 POUNDS MINIMUM AND 85.0 POUNDS MAXIMUM |
| CTHY | CONTACT ANGLE | 23.0 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | DIP AND CENTRIFUGE IN SPECIFIED LUBRICANT AT 200 GS FOR ONE MINUTE NOMINAL |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIS-30520,FSCM 58260 MFR REF SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC RETAINER AND PLASTIC PHENOLIC RETAINER |
| MATT | MATERIAL | STEEL COMP 440C BALL |
| MATT | MATERIAL | STEEL COMP 440C INNER RING |
| MATT | MATERIAL | STEEL COMP 440C OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-P-79,FORM T,TYPE FBE MIL SPEC SINGLE MATERIAL RESPONSE RETAINER |
| SFTT | SURFACE TREATMENT | PASSIVATE BALL |
| SFTT | SURFACE TREATMENT | PASSIVATE INNER RING |
| SFTT | SURFACE TREATMENT | PASSIVATE OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE BALL |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE INNER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| STYL | STYLE DESIGNATOR | COUNTERBORED OUTER RINGS,NON-SEPARABLE,BACK TO BACK MOUNTING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
