| Part Number : JP0030-14 | Manufacturer : Ransco Industries Inc | ||
| NSN : 5340-00-408-9894 (5340004089894) | |||
| Item Name : Clamp Loop | CAGE Code : 00968 | ||
| NIIN : 00-408-9894 (004089894) | |||
| FSC Code : 5340 Hardware Commercial | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 17532 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: JP003014 | |||
Thank you for taking an interest in part number JP0030-14, that of which is listed with the description Clamp Loop; Manufactured by Ransco Industries Inc and listed alongside the NSN 5340004089894, part number JP0030-14 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m belgium nv
CAGE Code: B2281 |
4m sigma corporation
CAGE Code: 0BC31 |
|
3m medical imaging
CAGE Code: 0ZRE5 |
0mcc inc
CAGE Code: 12156 |
|
4 seasons counting systems inc
CAGE Code: 0MHX5 |
20th century spring mfg
CAGE Code: 0PZE8 |
|
3 ring inc
CAGE Code: 68310 |
3h products co
CAGE Code: 0CJ60 |
|
3m telecom system group
CAGE Code: 0Y7Y1 |
3m pharmaceuticals nz ltd
CAGE Code: EA139 |
|
3 y power technology inc
CAGE Code: 1XVP7 |
2eme regiment du materiel
CAGE Code: FARD5 |
|
3m deutschland gmbh
CAGE Code: D2607 |
3d evolution ltd
CAGE Code: KD959 |
|
3m australia pty ltd
CAGE Code: Z0040,ZA992,ZD110,ZW687 |
| Part Number : JP0030-14 | Manufacturer : Ransco Industries Inc | ||
| NSN Number : 5340-00-408-9894 (5340004089894) | |||
| Item Name : Clamp Loop | CAGE Code : 00968 | ||
| NIIN : 004089894 | |||
| FSC CODE : 5340 Hardware Commercial | |||
Thank you for taking an interest in part number JP0030-14, that of which is listed with the description Clamp Loop; Manufactured by Ransco Industries Inc and listed alongside the NSN 5340004089894, part number JP0030-14 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5340-00-408-9894 Item PartTypeName: CLAMP,LOOP | 5340 | 004089894 | 0 | P | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| JP0030-14 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAAL | TONGUE HOLE TYPE | ROUND,UNTHREADED |
| AAAP | CUSHIONING ENVIRONMENTAL PROTECTION | FUEL,AROMATIC AND HEAT AND HYDRAULIC FLUID AND OIL RESISTANT |
| ABMK | OVERALL WIDTH | 0.500 INCHES NOMINAL |
| ABMZ | DIAMETER | 0.204 INCHES NOMINAL |
| ABPX | MATERIAL THICKNESS | 0.051 INCHES NOMINAL |
| AZCY | CENTER TO CENTER DISTANCE BETWEEN LOOP AND MOUNTING HOLE | 0.908 INCHES NOMINAL |
| AZDC | DISTANCE FROM LOOP CENTER TO TONGUE END | 1.126 INCHES NOMINAL |
| BZTN | LOOP INSIDE DIAMETER | 0.875 INCHES NOMINAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6721JGBAMS 5510 MIL SPEC 1ST MATERIAL RESPONSE BAND OR AMS 5510 ASSN STD 2ND MATERIAL RESPONSE BAND OR MIL-S-6721 MIL SPEC 2ND MATERIAL RESPONSE BAND |
| STYL | STYLE DESIGNATOR | OFFSET MOUNT |
| ZZZK | SPECIFICATION/STANDARD DATA | 81205-BACC10EP MANUFACTURERS SPECIFICATION |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
