| Part Number : 712757-40 | Manufacturer : Raytheon Company | ||
| NSN : 5955-01-327-5392 (5955013275392) | |||
| Item Name : Crystal Unit Quartz | CAGE Code : 05869 | ||
| NIIN : 01-327-5392 (013275392) | |||
| FSC Code : 5955 Oscillators and Piezoelectric Crystals | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 00196 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 71275740 | |||
Thank you for taking an interest in part number 712757-40, that of which is listed with the description Crystal Unit Quartz; Manufactured by Raytheon Company and listed alongside the NSN 5955013275392, part number 712757-40 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3m deutschland gmbh
CAGE Code: D2607 |
3gen grup trafik ltd
CAGE Code: TB427 |
|
4 r electro systems
CAGE Code: 1T600 |
3nity products llc
CAGE Code: 8HDM8 |
|
3m company communication markets
CAGE Code: 0VGY3 |
1spatial ltd
CAGE Code: U3518 |
|
5 11 inc
CAGE Code: 3YEL6 |
259 holdings ltd
CAGE Code: 431P3 |
|
3m italia spa
CAGE Code: A3445 |
3m co admininistrative electronic
CAGE Code: 20999 |
|
3m purification pty limited
CAGE Code: Z5295 |
4 ld inc
CAGE Code: 0ACW5 |
|
3m co abrasive systems division
CAGE Code: 078Z1 |
4 m company inc
CAGE Code: 1K407,57268 |
|
28eme groupe geographique
CAGE Code: FAR17 |
| Part Number : 712757-40 | Manufacturer : Raytheon Company | ||
| NSN Number : 5955-01-327-5392 (5955013275392) | |||
| Item Name : Crystal Unit Quartz | CAGE Code : 05869 | ||
| NIIN : 013275392 | |||
| FSC CODE : 5955 Oscillators and Piezoelectric Crystals | |||
Thank you for taking an interest in part number 712757-40, that of which is listed with the description Crystal Unit Quartz; Manufactured by Raytheon Company and listed alongside the NSN 5955013275392, part number 712757-40 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5955-01-327-5392 Item PartTypeName: CRYSTAL UNIT,QUARTZ | 5955 | 013275392 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| 7 | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 7222201-40 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AEHG | SPECIFIED FREQUENCY | 119.6875 MEGAHERTZ |
| AGAV | END ITEM IDENTIFICATION | RECEIVER-EXCITER GROUP OR-256/TPQ-37 |
| CQYL | DRIVE LEVEL RATING | 1.0 MILLIWATTS NOMINAL |
| ABHP | OVERALL LENGTH | 0.265 INCHES MAXIMUM |
| AEBT | TERMINAL DIAMETER | 0.018 INCHES NOMINAL |
| AEHD | CIRCUIT RESONANCE | SERIES RESONANCE |
| AFGA | OPERATING TEMP RANGE | -50.0 TO 70.0 DEG CELSIUS |
| TEST | TEST DATA DOCUMENT | 05869-712757 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| ABMZ | DIAMETER | 0.335 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 0.408 INCHES MAXIMUM |
| AEHC | MODE OF OSCILLATION | THIRD OVERTONE AND FIFTH OVERTONE |
| CRMP | EQUIVALENT RESISTANCE VALUE IN OHMS | 40.0 MINIMUM AND 70.0 MAXIMUM |
| ZZZK | SPECIFICATION/STANDARD DATA | 05869-712757 MANUFACTURERS SPECIFICATION CONTROL |
| ABJT | TERMINAL LENGTH | 0.610 INCHES MINIMUM |
| AEHF | SHUNT CAPACITANCE IN PICOFARADS | 4.5 NOMINAL |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| CRFX | FREQUENCY TOLERANCE FOR OPERATING TEMP IN PERCENT | -0.045 TO 0.045 |
| STYL | STYLE DESIGNATOR | HAT TYPE,3 WIRE LEADS |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
