| Part Number : 530500-5 | Manufacturer : Raytheon Company | ||
| NSN : 5990-01-355-8875 (5990013558875) | |||
| Item Name : Synchro Control Transformer | CAGE Code : 96214 | ||
| NIIN : 01-355-8875 (013558875) | |||
| FSC Code : 5990 Synchros and Resolvers | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 15289 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 5305005 | |||
Thank you for taking an interest in part number 530500-5, that of which is listed with the description Synchro Control Transformer; Manufactured by Raytheon Company and listed alongside the NSN 5990013558875, part number 530500-5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 530500-5 | Manufacturer : Raytheon Company | ||
| NSN Number : 5990-01-355-8875 (5990013558875) | |||
| Item Name : Synchro Control Transformer | CAGE Code : 96214 | ||
| NIIN : 013558875 | |||
| FSC CODE : 5990 Synchros and Resolvers | |||
Thank you for taking an interest in part number 530500-5, that of which is listed with the description Synchro Control Transformer; Manufactured by Raytheon Company and listed alongside the NSN 5990013558875, part number 530500-5 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5990-01-355-8875 Item PartTypeName: SYNCHRO,CONTROL TRANSFORMER | 5990 | 013558875 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CM01014110 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAFZ | BODY MATERIAL | STEEL,STAINLESS |
| ABHP | OVERALL LENGTH | 1.6300 INCHES MAXIMUM |
| ABKU | FLANGE THICKNESS | 0.0620 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.0900 INCHES NOMINAL SINGLE SHAFT |
| ABXF | SHAFT LENGTH | 0.4150 INCHES NOMINAL SINGLE SHAFT |
| AJVH | MAXIMUM TOTAL NULL VOLTAGE OUTPUT IN MILLIVOLTS PER VOLT | 30.00 |
| CRGZ | PLUS J ZSO REACTANCE IN OHMS | 45.00 NOMINAL |
| CRSJ | SHAFT TYPE | ROUND,SLOTTED SINGLE SHAFT |
| CSJY | TRANSFORMATION RATIO | 0.454 ROTOR TO STATOR NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.6910 INCHES NOMINAL |
| AJSL | BODY SIZE | 8 |
| AJSQ | STATOR INPUT ELECTRICAL POWER RATING | 0.54 WATTS NOMINAL |
| AJSW | ZRO RESISTANCE IN OHMS | 54.00 NOMINAL |
| AJVF | PHASE SHIFT ANGLE IN DEG | 8.500 INPUT TO OUTPUT NOMINAL |
| AJVS | ACTUATOR FRICTION TORQUE AT MINUS 55 DEG CELSIUS | 9.00 CENTIMETER-GRAMS NOMINAL |
| AJVT | ACTUATOR FRICTION TORQUE AT PLUS 25 DEG CELSIUS | 3.00 CENTIMETER-GRAMS NOMINAL |
| AJWQ | PILOT LENGTH | 0.0400 NOMINAL INCHES |
| CRHN | SHAFT SLOT WIDTH | 0.0250 INCHES NOMINAL SINGLE SHAFT |
| TEST | TEST DATA DOCUMENT | 96214-530500 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWI |
| AAVL | PILOT DIAMETER | 0.5000 INCHES NOMINAL |
| ABKK | FLANGE DIAMETER | 0.7500 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| AJSN | STATOR INPUT VOLTAGE RATING IN VOLTS | 26.00 NOMINAL |
| AJSP | STATOR INPUT CURRENT RATING | 113.0 MILLIAMPERES MAXIMUM |
| AJSS | FREQUENCY IN HERTZ | 400.0 NOMINAL |
| AJSY | ZSO RESISTANCE IN OHMS | 12.00 NOMINAL |
| AJTS | ROTOR DC RESISTANCE IN OHMS | 37.00 NOMINAL |
| AJTT | STATOR DC RESISTANCE IN OHMS | 12.00 NOMINAL |
| AJWH | SHAFT END PLAY | 0.0005 INCHES MINIMUM AND 0.0015 INCHES MAXIMUM |
| AJWX | MOUNTING SURFACE TO TERMINAL END DISTANCE | 1.2400 INCHES MAXIMUM |
| AJXB | SHAFT MAXIMUM RUNOUT | 0.0010 INCHES |
| CQTM | TERMINAL LOCATION | REAR |
| CQXQ | PLUS J ZRO REACTANCE IN OHMS | 260.00 NOMINAL |
| CWYF | SHAFT END PLAY DETERMINING WEIGHT | 8.0 OUNCES |
| TTQY | TERMINAL TYPE AND QUANTITY | 5 WIRE LEAD |
| AAQL | BODY STYLE | STANDARD ROUND A |
| AJWG | SHAFT MAXIMUM RADIAL PLAY | 0.0008 INCHES |
| CQZS | SHAFT SLOT DEPTH | 0.0300 INCHES NOMINAL SINGLE SHAFT |
| CWXK | SHAFT RADIAL PLAY DETERMINING WEIGHT | 4.0 OUNCES |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
