| Part Number : CC48117 | Manufacturer : Rbc Aircraft Products Inc | ||
| NSN : 3110-01-173-6853 (3110011736853) | |||
| Item Name : Cam Follower Needle Bearing | CAGE Code : 3NPS1 | ||
| NIIN : 01-173-6853 (011736853) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00040 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number CC48117, that of which is listed with the description Cam Follower Needle Bearing; Manufactured by Rbc Aircraft Products Inc and listed alongside the NSN 3110011736853, part number CC48117 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
25 canadian forces supply depot
CAGE Code: 35637 |
5dt inc
CAGE Code: 3BPF1 |
|
498 msug
CAGE Code: 5VW08 |
331 l tech productions llc
CAGE Code: 01XA0 |
|
31 mile equipment co
CAGE Code: 07PE3 |
1db metravib
CAGE Code: FAQ34 |
|
3nity products llc
CAGE Code: 8HDM8 |
3075109 canada inc
CAGE Code: L09L0 |
|
20th century fiberglass
CAGE Code: 80241 |
313 aerospace llc
CAGE Code: 3VEK3 |
|
3m aerospace
CAGE Code: R0844 |
4 sure com inc
CAGE Code: 1LDH8 |
|
12 volt shop
CAGE Code: Z0JM2 |
4 s mfg
CAGE Code: 0D9C0 |
|
3m co abrasive systems division
CAGE Code: 078Z1 |
| Part Number : CC48117 | Manufacturer : Rbc Aircraft Products Inc | ||
| NSN Number : 3110-01-173-6853 (3110011736853) | |||
| Item Name : Cam Follower Needle Bearing | CAGE Code : 3NPS1 | ||
| NIIN : 011736853 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number CC48117, that of which is listed with the description Cam Follower Needle Bearing; Manufactured by Rbc Aircraft Products Inc and listed alongside the NSN 3110011736853, part number CC48117 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-173-6853 Item PartTypeName: CAM FOLLOWER,NEEDLE BEARING | 3110 | 011736853 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| CC48117 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | 0.6900 INCHES MINIMUM |
| ABHP | OVERALL LENGTH | 2.8400 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.6245 INCHES MINIMUM AND 1.6260 INCHES MAXIMUM |
| AGRJ | STUD DIAMETER | 0.8740 INCHES MINIMUM AND 0.8755 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.8700 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM |
| AGXF | STUD LENGTH | 1.9100 INCHES MINIMUM AND 1.9700 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | RIGID |
| CBBL | FEATURES PROVIDED | LUBRICATION HOLE AND FLUSH LUBRICATION FITTING |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| CQJX | NOMINAL THREAD SIZE | 0.875 INCHES |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC ACETAL OR PLASTIC POLYTETRAFLUOROETHYLENE SEAL |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE OR PLASTIC POLYAMIDE WASHER |
| MATT | MATERIAL | STEEL COMP 8620H OR STEEL COMP E52100 END PLATE |
| MATT | MATERIAL | STEEL COMP E50100 OR STEEL COMP E52100 ROLLER |
| MATT | MATERIAL | STEEL COMP E52100 OR STEEL COMP 8620H STUD |
| MATT | MATERIAL | STEEL COMP E52100 OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD ALL MATERIAL RESPONSES END PLATE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD ALL MATERIAL RESPONSES ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD ALL MATERIAL RESPONSES STUD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE OUTER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | L-P-392 FED SPEC 1ST MATERIAL RESPONSE SEAL |
| SFTT | SURFACE TREATMENT | CADMIUM EXPOSED SURFACES OF STUD AND WASHER AS MOUNTED |
| SFTT | SURFACE TREATMENT | CHROMIUM OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-C-320,CL 2 FED SPEC SINGLE TREATMENT RESPONSE OUTER RING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE EXPOSED SURFACES OF STUD AND WASHER AS MOUNTED |
| STYL | STYLE DESIGNATOR | CAM FOLLOWER |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
