| Part Number : 11853D3-6-5 1 | Manufacturer : Reid Products Inc | ||
| NSN : 5305-01-417-3840 (5305014173840) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 59563 | ||
| NIIN : 01-417-3840 (014173840) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 11853D3651 | |||
Thank you for taking an interest in part number 11853D3-6-5 1, that of which is listed with the description Screw Close Tolerance; Manufactured by Reid Products Inc and listed alongside the NSN 5305014173840, part number 11853D3-6-5 1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3 d machining inc
CAGE Code: 09SY7 |
60 degrees pharmaceuticals llc
CAGE Code: 71D06 |
|
3m company communication markets
CAGE Code: 0VGY3 |
10zig technology inc
CAGE Code: 49E04 |
|
1 source electronic components inc
CAGE Code: 3FY68 |
3m industrial adhesives and tapes
CAGE Code: 0XV20 |
|
1spatial ltd
CAGE Code: U3518 |
3h products co
CAGE Code: 0CJ60 |
|
3 phoenix inc
CAGE Code: 3NJE3 |
184th air refueling wing
CAGE Code: 3EP27 |
|
2101 llc
CAGE Code: 1GH76 |
1st american metals inc
CAGE Code: 0MP49 |
|
2m machining and manufacturing
CAGE Code: 6Y604 |
24 hour distributors
CAGE Code: 12136,3WKM0 |
|
1343080 alberta ltd
CAGE Code: L0796 |
| Part Number : 11853D3-6-5 1 | Manufacturer : Reid Products Inc | ||
| NSN Number : 5305-01-417-3840 (5305014173840) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 59563 | ||
| NIIN : 014173840 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 11853D3-6-5 1, that of which is listed with the description Screw Close Tolerance; Manufactured by Reid Products Inc and listed alongside the NSN 5305014173840, part number 11853D3-6-5 1 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-417-3840 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014173840 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TX1024D3-6-5A | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1995 INCHES MAXIMUM |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
| AAJD | THREAD CLASS | 3A |
| AASA | THREAD LENGTH | 0.313 INCHES NOMINAL |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAWU | SINGLE SHEAR STRENGTH | 125000 POUNDS PER SQUARE INCH |
| AASL | HEAD DIAMETER | 0.265 INCHES MINIMUM AND 0.295 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| AASB | FASTENER LENGTH | 0.673 INCHES MINIMUM AND 0.703 INCHES MAXIMUM |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| AASU | HEAD HEIGHT | 0.049 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| ANEE | GRIP LENGTH | 0.365 INCHES MINIMUM AND 0.385 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
