| Part Number : 11853D3-9-7A | Manufacturer : Reid Products Inc | ||
| NSN : 5305-01-473-8515 (5305014738515) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 59563 | ||
| NIIN : 01-473-8515 (014738515) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 11853D397A | |||
Thank you for taking an interest in part number 11853D3-9-7A, that of which is listed with the description Screw Close Tolerance; Manufactured by Reid Products Inc and listed alongside the NSN 5305014738515, part number 11853D3-9-7A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
451676 ontario ltd
CAGE Code: 38552 |
4 ld inc
CAGE Code: 0ACW5 |
|
1 source electronics inc
CAGE Code: 551K1 |
313 aerospace llc
CAGE Code: 3VEK3 |
|
4 c s welding lab inc
CAGE Code: 59685 |
3m espana sa
CAGE Code: 0211B,H7034 |
|
2connect it b v
CAGE Code: HG221 |
2101 llc
CAGE Code: 1GH76 |
|
3 dimensional engineering inc
CAGE Code: 1HLX4 |
3d robotics llc
CAGE Code: 64TY6 |
|
3m united kingdom plc
CAGE Code: K0993,K8767 |
3 m federal systems dept
CAGE Code: 68352 |
|
2h energy
CAGE Code: F1797 |
357319 ontario ltd
CAGE Code: 38510 |
|
3m purification pty limited
CAGE Code: Z5295 |
| Part Number : 11853D3-9-7A | Manufacturer : Reid Products Inc | ||
| NSN Number : 5305-01-473-8515 (5305014738515) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 59563 | ||
| NIIN : 014738515 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 11853D3-9-7A, that of which is listed with the description Screw Close Tolerance; Manufactured by Reid Products Inc and listed alongside the NSN 5305014738515, part number 11853D3-9-7A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-473-8515 Item Description: Screw Close Tolerance | 5305 | 014738515 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 11853d3-9-7a | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASK | HEAD STYLE | FLAT COUNTERSUNK UNDERCUT |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AHYM | NOMINAL THREAD DIAMETER | 0.190 INCHES |
| AAJD | THREAD CLASS | 3A |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AAWU | SINGLE SHEAR STRENGTH | 125000 POUNDS PER SQUARE INCH |
| AASA | THREAD LENGTH | 0.437 INCHES NOMINAL |
| AAUR | GRIP DIAMETER | 0.1885 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| AASL | HEAD DIAMETER | 0.265 INCHES MINIMUM AND 0.293 INCHES MAXIMUM |
| AASB | FASTENER LENGTH | 0.985 INCHES MINIMUM AND 1.015 INCHES MAXIMUM |
| AASU | HEAD HEIGHT | 0.049 INCHES NOMINAL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| ABQZ | INTERNAL DRIVE STYLE | OFFSET CRUCIFORM (TORQUE SET) |
| ANEE | GRIP LENGTH | 0.552 INCHES MINIMUM AND 0.572 INCHES MAXIMUM |
| CMLP | THREAD QUANTITY PER INCH | 32 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
