| Part Number : 11825D5-18A | Manufacturer : Reid Products Inc | ||
| NSN : 5305-01-481-9414 (5305014819414) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 59563 | ||
| NIIN : 01-481-9414 (014819414) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 11825D518A | |||
Thank you for taking an interest in part number 11825D5-18A, that of which is listed with the description Screw Close Tolerance; Manufactured by Reid Products Inc and listed alongside the NSN 5305014819414, part number 11825D5-18A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 11825D5-18A | Manufacturer : Reid Products Inc | ||
| NSN Number : 5305-01-481-9414 (5305014819414) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 59563 | ||
| NIIN : 014819414 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 11825D5-18A, that of which is listed with the description Screw Close Tolerance; Manufactured by Reid Products Inc and listed alongside the NSN 5305014819414, part number 11825D5-18A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-481-9414 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014819414 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3M1170D5-18A | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| AAUJ | SPLINE MAJOR DIAMETER | 0.154 INCHES MINIMUM AND 0.156 INCHES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| ANEE | GRIP LENGTH | 1.125 INCHES NOMINAL |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AGAV | III END ITEM IDENTIFICATION | F/A-18E, F/A-18F |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT, 100 DEGREE REDUCED HEAD, GEAR DRIVE RECESS - PH13-8MO (125 KSI SHEAR), INCONEL 718 (125 KSI SHEAR), 6AL-4V TITANIUM (95 KSI SHEAR). |
| AASL | HEAD DIAMETER | 0.438 INCHES MINIMUM AND 0.445 INCHES MAXIMUM |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| CQBC | MINIMUM TENSILE STRENGTH | 5820 POUNDS PER SQUARE INCH |
| CRTL | CRITICALITY CODE JUSTIFICATION | AGAV |
| AHYM | NOMINAL THREAD DIAMETER | 0.313 INCHES |
| AASB | FASTENER LENGTH | 1.594 INCHES NOMINAL |
| MATT | MATERIAL | STEEL COMP XM-13 OVERALL |
| AAUR | GRIP DIAMETER | 0.312 INCHES NOMINAL |
| AASA | THREAD LENGTH | 0.469 INCHES NOMINAL |
| ABQJ | POINT STYLE | FLAT |
| AAVA | POINT DIAMETER | 0.469 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
