| Part Number : 11853C4D37-6A | Manufacturer : Reid Products Inc | ||
| NSN : 5305-01-496-1416 (5305014961416) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 59563 | ||
| NIIN : 01-496-1416 (014961416) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 11853C4D376A | |||
Thank you for taking an interest in part number 11853C4D37-6A, that of which is listed with the description Screw Close Tolerance; Manufactured by Reid Products Inc and listed alongside the NSN 5305014961416, part number 11853C4D37-6A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 11853C4D37-6A | Manufacturer : Reid Products Inc | ||
| NSN Number : 5305-01-496-1416 (5305014961416) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 59563 | ||
| NIIN : 014961416 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 11853C4D37-6A, that of which is listed with the description Screw Close Tolerance; Manufactured by Reid Products Inc and listed alongside the NSN 5305014961416, part number 11853C4D37-6A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-496-1416 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 014961416 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| WC1262C4D37-6A | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABQZ | INTERNAL DRIVE STYLE | TORX |
| AASK | HEAD STYLE | FLAT COUNTERSUNK |
| MATT | MATERIAL | NICKEL ALLOY 718 OVERALL |
| ASXK | HOLE QUANTITY | 1 |
| AASA | THREAD LENGTH | 0.375 INCHES NOMINAL |
| AHYM | NOMINAL THREAD DIAMETER | 0.250 INCHES |
| CRSQ | COUNTERSINK ANGLE | 99.0 DEGREES MINIMUM AND 101.0 DEGREES MAXIMUM |
| AAJD | THREAD CLASS | 3A |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASL | HEAD DIAMETER | 0.358 INCHES MINIMUM AND 0.365 INCHES MAXIMUM |
| CXCY | III PART NAME ASSIGNED BY CONTROLLING AGENCY | BOLT,100 DEGREE REDUCED DHEAD,GEAR DRIVE RECESS-SPECIAL THREAD LENGTH,INCONEL 718 (125 KSI SHEAR) |
| AGAV | III END ITEM IDENTIFICATION | F18 E/F |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| SFTT | SURFACE TREATMENT | PASSIVATE OVERALL |
| AAUR | GRIP DIAMETER | 0.2485 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM |
| ANEE | GRIP LENGTH | 2.303 INCHES MINIMUM AND 2.323 INCHES MAXIMUM |
| AAUB | HOLE DIAMETER | 0.076 INCHES MINIMUM AND 0.081 INCHES MAXIMUM |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BPS-F-69 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| AAUH | SPLINE MINOR DIAMETER | 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM |
| AAUJ | SPLINE MAJOR DIAMETER | 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM |
| BQDM | HOLE TYPE | DRILLED |
| AASB | FASTENER LENGTH | 2.673 INCHES MINIMUM AND 2.703 INCHES MAXIMUM |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
