| Part Number : 11827C3-5A | Manufacturer : Reid Products Inc | ||
| NSN : 5305-01-500-8179 (5305015008179) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 59563 | ||
| NIIN : 01-500-8179 (015008179) | |||
| FSC Code : 5305 Screws | |||
| FSG Code : 53 Hardware and Abrasives | |||
| INC Code : 29294 | |||
| NCB Code : 01 | Country : USA | ||
| Alternate P/N: 11827C35A | |||
Thank you for taking an interest in part number 11827C3-5A, that of which is listed with the description Screw Close Tolerance; Manufactured by Reid Products Inc and listed alongside the NSN 5305015008179, part number 11827C3-5A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 11827C3-5A | Manufacturer : Reid Products Inc | ||
| NSN Number : 5305-01-500-8179 (5305015008179) | |||
| Item Name : Screw Close Tolerance | CAGE Code : 59563 | ||
| NIIN : 015008179 | |||
| FSC CODE : 5305 Screws | |||
Thank you for taking an interest in part number 11827C3-5A, that of which is listed with the description Screw Close Tolerance; Manufactured by Reid Products Inc and listed alongside the NSN 5305015008179, part number 11827C3-5A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5305-01-500-8179 Item PartTypeName: SCREW,CLOSE TOLERANCE | 5305 | 015008179 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| A | 0 | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| TX1026C3-5A | 1 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AASK | Head Style | FLAT COUNTERSUNK |
| ABQZ | Internal Drive Style | TORX |
| FEAT | Special Features | 125 KSI SHEAR STRENGTH |
| AHYM | Nominal Thread Diameter | 0.190 INCHES |
| CMLP | Thread Quantity Per Inch | 32 |
| AASB | Fastener Length | 0.6425 INCHES MINIMUM AND 0.6725 INCHES MAXIMUM |
| CXCY | Part Name Assigned By Controlling Agency | BOLT, 100 DEGREE TENSION HEAD, GEAR DRIVE RECESS |
| AASA | Thread Length | 0.345 INCHES NOMINAL |
| AAUR | Grip Diameter | 0.1890 INCHES MINIMUM AND 0.1895 INCHES MAXIMUM |
| SFTT | Surface Treatment | PASSIVATE OVERALL |
| AASL | Head Diameter | 0.3729 INCHES MINIMUM AND 0.3813 INCHES MAXIMUM |
| CRSQ | Countersink Angle | 99.0 DEGREES MINIMUM AND 101.00 DEGREES MAXIMUM |
| ANEE | Grip Length | 0.3025 INCHES MINIMUM AND 0.3225 INCHES MAXIMUM |
| AAJF | Thread Direction | RIGHT-HAND |
| ABQJ | Point Style | FLAT |
| MATT | Material | NICKEL ALLOY 718 OVERALL |
| THSD | Thread Series Designator | UNJF |
| AAUH | Spline Minor Diameter | 0.1105 INCHES MINIMUM AND 0.1125 INCHES MAXIMUM |
| AGAV | End Item Identification | F18 E/F |
| MDCL | Material Document And Classification | AAMS 5662 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| AAUJ | Spline Major Diameter | 0.1540 INCHES MINIMUM AND 0.1560 INCHES MAXIMUM |
| AAJD | Thread Class | 3A |
| MRC | Decoded Requirement | Clear Text Reply |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
