| Part Number : A622 | Manufacturer : Reliance Electric Industrial Co | ||
| NSN : 3130-00-623-3022 (3130006233022) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 71956 | ||
| NIIN : 00-623-3022 (006233022) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number A622, that of which is listed with the description Bearing Unit Ball; Manufactured by Reliance Electric Industrial Co and listed alongside the NSN 3130006233022, part number A622 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : A622 | Manufacturer : Reliance Electric Industrial Co | ||
| NSN Number : 3130-00-623-3022 (3130006233022) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 71956 | ||
| NIIN : 006233022 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number A622, that of which is listed with the description Bearing Unit Ball; Manufactured by Reliance Electric Industrial Co and listed alongside the NSN 3130006233022, part number A622 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-00-623-3022 Item PartTypeName: BEARING UNIT,BALL | 3130 | 006233022 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| A622 | 2 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTB | MOUNTING HOLE DIAMETER | 0.6400 INCHES MINIMUM AND 0.7500 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 1.9380 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 1.3800 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 6.2500 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 4.5000 INCHES MINIMUM AND 4.6200 INCHES MAXIMUM |
| AFWD | HOUSING LENGTH | 1.8300 INCHES MINIMUM AND 2.4700 INCHES MAXIMUM |
| AFWE | HOUSING WIDTH | 7.7500 INCHES MINIMUM AND 8.1200 INCHES MAXIMUM |
| AGNF | BASE LENGTH | 2.1000 INCHES MINIMUM AND 2.4000 INCHES MAXIMUM |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 2.3700 INCHES MINIMUM AND 2.6700 INCHES MAXIMUM |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 2.2500 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 90.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | ROUND,UNTHREADED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | STEEL OVERALL |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK,SOLID |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
