| Part Number : 131067 | Manufacturer : Reliance Electric Industrial Co | ||
| NSN : 3130-01-006-9186 (3130010069186) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 71956 | ||
| NIIN : 01-006-9186 (010069186) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 131067, that of which is listed with the description Bearing Unit Ball; Manufactured by Reliance Electric Industrial Co and listed alongside the NSN 3130010069186, part number 131067 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 131067 | Manufacturer : Reliance Electric Industrial Co | ||
| NSN Number : 3130-01-006-9186 (3130010069186) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 71956 | ||
| NIIN : 010069186 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number 131067, that of which is listed with the description Bearing Unit Ball; Manufactured by Reliance Electric Industrial Co and listed alongside the NSN 3130010069186, part number 131067 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-006-9186 Item PartTypeName: BEARING UNIT,BALL | 3130 | 010069186 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3021185-1 | 5 | 2 | 7 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABKG | BOLT CIRCLE DIAMETER | 5.6600 INCHES NOMINAL |
| ABKU | FLANGE THICKNESS | 0.6200 INCHES MAXIMUM |
| ABTB | MOUNTING HOLE DIAMETER | 0.5000 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 1.5000 INCHES MINIMUM AND 1.5005 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 6.8000 INCHES NOMINAL |
| AFWB | HOUSING DIAMETER | 4.3100 INCHES MAXIMUM |
| AFWD | HOUSING LENGTH | 1.6094 INCHES MAXIMUM |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 2.3200 INCHES MAXIMUM |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 45.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | ECCENTRIC CAM LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | ROUND,UNTHREADED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | IRON CAST HOUSING |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AISI ASSN STD SINGLE MATERIAL RESPONSE BALL |
| STYL | STYLE DESIGNATOR | FLANGE BLOCK |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
