| Part Number : DREM4-334 | Manufacturer : Research Designing Service | ||
| NSN : 3120-00-809-6399 (3120008096399) | |||
| Item Name : Bearing Plain Rod End | CAGE Code : 81367 | ||
| NIIN : 00-809-6399 (008096399) | |||
| FSC Code : 3120 Bearings Plain Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 13209 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: DREM4334 | |||
Thank you for taking an interest in part number DREM4-334, that of which is listed with the description Bearing Plain Rod End; Manufactured by Research Designing Service and listed alongside the NSN 3120008096399, part number DREM4-334 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : DREM4-334 | Manufacturer : Research Designing Service | ||
| NSN Number : 3120-00-809-6399 (3120008096399) | |||
| Item Name : Bearing Plain Rod End | CAGE Code : 81367 | ||
| NIIN : 008096399 | |||
| FSC CODE : 3120 Bearings Plain Unmounted | |||
Thank you for taking an interest in part number DREM4-334, that of which is listed with the description Bearing Plain Rod End; Manufactured by Research Designing Service and listed alongside the NSN 3120008096399, part number DREM4-334 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| MRC | Criteria | Characteristic |
|---|---|---|
| AAZE | SHANK DIAMETER | 0.4989 INCHES MINIMUM AND 0.4994 INCHES MAXIMUM |
| AAZF | SHANK STYLE | HOLLOW, UNTHREADED |
| AGGF | OUTER MEMBER OUTSIDE DIAMETER | 0.7400 INCHES MINIMUM AND 0.7850 INCHES MAXIMUM |
| AGGH | OUTER MEMBER WIDTH | 0.2760 INCHES MINIMUM AND 0.2860 INCHES MAXIMUM |
| AGHC | SHANK INSIDE DIAMETER | 0.2460 INCHES MINIMUM AND 0.2540 INCHES MAXIMUM |
| AGHD | SHANK HOLE LENGTH | 1.0000 INCHES NOMINAL |
| CQFM | HARDNESS RATING | 32.0 ROCKWELL C MINIMUM ROD END BODY |
| MATT | MATERIAL | STEEL COMP 440C INNER MEMBER |
| TEST | TEST DATA DOCUMENT | 81349-MIL-I-6866 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| ABXV | BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| AGKP | STATIC RADIAL LOAD RATING | 2400 POUNDS |
| STYL | STYLE DESIGNATOR | BALL TYPE |
| AGGG | BORE CENTER TO SHANK END DISTANCE | 4.7300 INCHES MINIMUM AND 4.7500 INCHES MAXIMUM |
| AGGJ | INNER MEMBER WIDTH | 0.4320 INCHES MINIMUM AND 0.4370 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 5.1212 INCHES NOMINAL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
