| Part Number : WB217U | Manufacturer : Rexnord Industries Inc | ||
| NSN : 3110-00-071-8838 (3110000718838) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 19382 | ||
| NIIN : 00-071-8838 (000718838) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00014 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number WB217U, that of which is listed with the description Bearing Ball Annular; Manufactured by Rexnord Industries Inc and listed alongside the NSN 3110000718838, part number WB217U is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : WB217U | Manufacturer : Rexnord Industries Inc | ||
| NSN Number : 3110-00-071-8838 (3110000718838) | |||
| Item Name : Bearing Ball Annular | CAGE Code : 19382 | ||
| NIIN : 000718838 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number WB217U, that of which is listed with the description Bearing Ball Annular; Manufactured by Rexnord Industries Inc and listed alongside the NSN 3110000718838, part number WB217U is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-071-8838 Item PartTypeName: BEARING,BALL,ANNULAR | 3110 | 000718838 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| WB217EL | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABXV | BORE DIAMETER | 1.0625 INCHES MINIMUM AND 1.0630 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 2.4404 INCHES MINIMUM AND 2.4409 INCHES MAXIMUM |
| ADZG | UNABLE TO DECODE | UNABLE TO DECODE |
| AGVT | OUTER RING WIDTH | 0.7087 INCHES NOMINAL |
| AGVU | INNER RING WIDTH | 0.9325 INCHES MINIMUM AND 0.9375 INCHES MAXIMUM |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | PRESSED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | RIGID |
| AGZC | LOAD DIRECTION | RADIAL |
| AGZD | BORE SHAPE | STRAIGHT |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHAW | SELF-ALIGNMENT LOCATION | EXTERNAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | DOD-G-24508 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BALL |
| MATT | MATERIAL | STEEL INNER RING |
| MATT | MATERIAL | STEEL OUTER RING |
| MATT | MATERIAL | STEEL RETAINER |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
