| Part Number : SM8-12A | Manufacturer : Rexnord Industries Inc | ||
| NSN : 3110-00-080-0848 (3110000800848) | |||
| Item Name : Bearing Roller Rod End | CAGE Code : 77896 | ||
| NIIN : 00-080-0848 (000800848) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00050 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: SM812A | |||
Thank you for taking an interest in part number SM8-12A, that of which is listed with the description Bearing Roller Rod End; Manufactured by Rexnord Industries Inc and listed alongside the NSN 3110000800848, part number SM8-12A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : SM8-12A | Manufacturer : Rexnord Industries Inc | ||
| NSN Number : 3110-00-080-0848 (3110000800848) | |||
| Item Name : Bearing Roller Rod End | CAGE Code : 77896 | ||
| NIIN : 000800848 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number SM8-12A, that of which is listed with the description Bearing Roller Rod End; Manufactured by Rexnord Industries Inc and listed alongside the NSN 3110000800848, part number SM8-12A is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-080-0848 Item PartTypeName: BEARING,ROLLER,ROD END | 3110 | 000800848 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MR8AG | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.8750 INCHES NOMINAL |
| AAZF | SHANK STYLE | EXTERNALLY THREADED W/SLOT |
| ABHP | OVERALL LENGTH | 5.1650 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.5000 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 2.2700 INCHES NOMINAL |
| AGGY | SHANK THREAD LENGTH | 2.3100 INCHES NOMINAL |
| AGVT | OUTER RING WIDTH | 0.7200 INCHES NOMINAL |
| AGVU | INNER RING WIDTH | 1.0620 INCHES NOMINAL |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 4.0300 INCHES NOMINAL |
| AGYJ | SEAL QUANTITY | 2 |
| AGYK | SHIELD QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 14 |
| CQJX | NOMINAL THREAD SIZE | 0.875 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | WITH GREASE FITTING |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATT | MATERIAL | STEEL COMP 430 SHIELD |
| MATT | MATERIAL | STEEL COMP 4620 ROD END BODY |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 ROLLER |
| MATT | MATERIAL | STEEL SNAP RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7493 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SHIELD |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | SINGLE ROW,CONCAVE ROLLERS |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
