| Part Number : MR5ANG25 | Manufacturer : Rexnord Industries Inc | ||
| NSN : 3110-00-198-0252 (3110001980252) | |||
| Item Name : Bearing Roller Rod End | CAGE Code : 77896 | ||
| NIIN : 00-198-0252 (001980252) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00050 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number MR5ANG25, that of which is listed with the description Bearing Roller Rod End; Manufactured by Rexnord Industries Inc and listed alongside the NSN 3110001980252, part number MR5ANG25 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3d
CAGE Code: 0WY47 |
3m united kingdom plc
CAGE Code: K0993,K8767 |
|
5605 n illinois inc
CAGE Code: 089F4 |
3m australia pty ltd
CAGE Code: Z0040,ZA992,ZD110,ZW687 |
|
3d instruments llc
CAGE Code: 1XHY4,52159,64528 |
3 com/us robotics
CAGE Code: 1B8Q7 |
|
2 s 2 inc
CAGE Code: 5A8X0,787R6 |
4m sigma corporation
CAGE Code: 0BC31 |
|
3m co engineering document systems
CAGE Code: 1BY21 |
2001 micro systemation ab
CAGE Code: SK396 |
|
3d evolution ltd
CAGE Code: KD959 |
3m aerospace
CAGE Code: R0844 |
|
1 source electronics inc
CAGE Code: 551K1 |
3m quante ag telekommunikation
CAGE Code: D2771 |
|
10zig technology inc
CAGE Code: 49E04 |
| Part Number : MR5ANG25 | Manufacturer : Rexnord Industries Inc | ||
| NSN Number : 3110-00-198-0252 (3110001980252) | |||
| Item Name : Bearing Roller Rod End | CAGE Code : 77896 | ||
| NIIN : 001980252 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number MR5ANG25, that of which is listed with the description Bearing Roller Rod End; Manufactured by Rexnord Industries Inc and listed alongside the NSN 3110001980252, part number MR5ANG25 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-198-0252 Item PartTypeName: BEARING,ROLLER,ROD END | 3110 | 001980252 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MR5ANG25 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | 0.500 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | GREASE FITTING LOCATED ON LOWER HALF 45 DEG FROM HORIZONTAL CENTER LINE |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATT | MATERIAL | STEEL COMP 430 SHIELD |
| MATT | MATERIAL | STEEL COMP 4620 ROD END BODY |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 ROLLER |
| MATT | MATERIAL | STEEL SNAP RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7493 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SHIELD |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | SINGLE ROW,CONCAVE ROLLERS |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.5000 INCHES NOMINAL |
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 3.1070 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.3120 INCHES MINIMUM AND 0.3125 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.3600 INCHES MINIMUM AND 1.4100 INCHES MAXIMUM |
| AGGY | SHANK THREAD LENGTH | 1.3400 INCHES NOMINAL |
| AGVT | OUTER RING WIDTH | 0.4450 INCHES MINIMUM AND 0.4600 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.6820 INCHES MINIMUM AND 0.6870 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 2.3950 INCHES MINIMUM AND 2.4250 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYK | SHIELD QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
