| Part Number : MR6ANG25 | Manufacturer : Rexnord Industries Inc | ||
| NSN : 3110-00-198-2239 (3110001982239) | |||
| Item Name : Bearing Roller Rod End | CAGE Code : 77896 | ||
| NIIN : 00-198-2239 (001982239) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00050 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number MR6ANG25, that of which is listed with the description Bearing Roller Rod End; Manufactured by Rexnord Industries Inc and listed alongside the NSN 3110001982239, part number MR6ANG25 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : MR6ANG25 | Manufacturer : Rexnord Industries Inc | ||
| NSN Number : 3110-00-198-2239 (3110001982239) | |||
| Item Name : Bearing Roller Rod End | CAGE Code : 77896 | ||
| NIIN : 001982239 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number MR6ANG25, that of which is listed with the description Bearing Roller Rod End; Manufactured by Rexnord Industries Inc and listed alongside the NSN 3110001982239, part number MR6ANG25 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-198-2239 Item PartTypeName: BEARING,ROLLER,ROD END | 3110 | 001982239 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 8683175 | 6 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.6250 INCHES NOMINAL |
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 3.8600 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.3750 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.6600 INCHES NOMINAL |
| AGGY | SHANK THREAD LENGTH | 1.7500 INCHES NOMINAL |
| AGVT | OUTER RING WIDTH | 0.5500 INCHES NOMINAL |
| AGVU | INNER RING WIDTH | 0.8120 INCHES NOMINAL |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 3.0150 INCHES MINIMUM AND 3.0450 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYK | SHIELD QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 18 |
| CQJX | NOMINAL THREAD SIZE | 0.625 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | WITH FLUSH TYPE LUBRICATOR |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATT | MATERIAL | STEEL COMP 430 SHIELD |
| MATT | MATERIAL | STEEL COMP 4620 ROD END BODY |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 ROLLER |
| MATT | MATERIAL | STEEL SNAP RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7493 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SHIELD |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | SINGLE ROW,CONCAVE ROLLERS |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
