| Part Number : ST4AJ | Manufacturer : Rexnord Industries Inc | ||
| NSN : 3110-00-803-0230 (3110008030230) | |||
| Item Name : Bearing Roller Rod End | CAGE Code : 77896 | ||
| NIIN : 00-803-0230 (008030230) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00050 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number ST4AJ, that of which is listed with the description Bearing Roller Rod End; Manufactured by Rexnord Industries Inc and listed alongside the NSN 3110008030230, part number ST4AJ is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : ST4AJ | Manufacturer : Rexnord Industries Inc | ||
| NSN Number : 3110-00-803-0230 (3110008030230) | |||
| Item Name : Bearing Roller Rod End | CAGE Code : 77896 | ||
| NIIN : 008030230 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number ST4AJ, that of which is listed with the description Bearing Roller Rod End; Manufactured by Rexnord Industries Inc and listed alongside the NSN 3110008030230, part number ST4AJ is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-803-0230 Item PartTypeName: BEARING,ROLLER,ROD END | 3110 | 008030230 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SM4-6N-8 | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.8800 INCHES NOMINAL |
| AGYW | BEARING SEAL TYPE | CONTACT |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
| AAJD | THREAD CLASS | 3A |
| AAZE | SHANK DIAMETER | 0.3750 INCHES NOMINAL |
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 2.3900 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.2500 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 1.0200 INCHES NOMINAL |
| AGGY | SHANK THREAD LENGTH | 1.0600 INCHES NOMINAL |
| AGVT | OUTER RING WIDTH | 0.3600 INCHES NOMINAL |
| AGVU | INNER RING WIDTH | 0.5930 INCHES NOMINAL |
| AGYJ | SEAL QUANTITY | 2 |
| AGYK | SHIELD QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | KEYWAY IN SHANK 1.1500 IN. LG 0.093 IN. MIN 0.098 IN. MAX 0.064 IN. MIN 0.069 IN. MAX DEEP,FLUSH TYPE GREASE FITTING,RADIAL CLEARANCE 0.0000 IN. TO 0.0006 IN. |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATT | MATERIAL | STEEL COMP 430 SHIELD |
| MATT | MATERIAL | STEEL COMP 4620 ROD END BODY |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7493 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SHIELD |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | SINGLE ROW,CONCAVE ROLLERS |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
