| Part Number : YS112AB | Manufacturer : Rexnord Industries Inc | ||
| NSN : 3110-00-806-2428 (3110008062428) | |||
| Item Name : Bearing Roller Rod End | CAGE Code : 77896 | ||
| NIIN : 00-806-2428 (008062428) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00050 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number YS112AB, that of which is listed with the description Bearing Roller Rod End; Manufactured by Rexnord Industries Inc and listed alongside the NSN 3110008062428, part number YS112AB is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : YS112AB | Manufacturer : Rexnord Industries Inc | ||
| NSN Number : 3110-00-806-2428 (3110008062428) | |||
| Item Name : Bearing Roller Rod End | CAGE Code : 77896 | ||
| NIIN : 008062428 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number YS112AB, that of which is listed with the description Bearing Roller Rod End; Manufactured by Rexnord Industries Inc and listed alongside the NSN 3110008062428, part number YS112AB is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-806-2428 Item PartTypeName: BEARING,ROLLER,ROD END | 3110 | 008062428 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | U | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| SFP4-7B1-501 | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.6180 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM |
| AAZF | SHANK STYLE | INTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 2.3300 INCHES MINIMUM AND 2.3700 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.9350 INCHES MINIMUM AND 0.9700 INCHES MAXIMUM |
| ADZG | UNABLE TO DECODE | UNABLE TO DECODE |
| AGGY | SHANK THREAD LENGTH | 1.0938 INCHES MINIMUM AND 1.1562 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.3594 INCHES NOMINAL |
| AGVU | INNER RING WIDTH | 0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.8750 INCHES NOMINAL |
| AGYK | SHIELD QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES |
| CRTL | CRITICALITY CODE JUSTIFICATION | FEAT |
| CTLK | SELF-ALIGNMENT ANGLE | 0.35 DEGREES MINIMUM AND 0.65 DEGREES MAXIMUM |
| FEAT | SPECIAL FEATURES | CRITICAL SAFETY ITEM (CSI) AND CRITICAL APPLICATION ITEM (CAI) WITH CATASTROPHIC FAILURE CONSEQUENCES. FAILURE OF THIS ITEM WILL RESULT IN AN UNACCEPTABLE PROBABILITY OF A CLASS A MISHAP |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | RUBBER SYNTHETIC SHIELD |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 ROLLER |
| MATT | MATERIAL | STEEL CORROSION RESISTING ROD END BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 204-001-064-1,97499 MFR REF SINGLE MATERIAL RESPONSE ROD END BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 204-001-064-1,97499 MFR REF SINGLE MATERIAL RESPONSE SHIELD |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED-STD-66 FED STD SINGLE MATERIAL RESPONSE ROLLER |
| STYL | STYLE DESIGNATOR | SINGLE ROW,CONCAVE ROLLERS |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
