| Part Number : SFP4.7B1.501 | Manufacturer : Rexnord Industries Inc | ||
| NSN : 3110-01-022-2042 (3110010222042) | |||
| Item Name : Bearing Roller Rod End | CAGE Code : 77896 | ||
| NIIN : 01-022-2042 (010222042) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00050 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number SFP4.7B1.501, that of which is listed with the description Bearing Roller Rod End; Manufactured by Rexnord Industries Inc and listed alongside the NSN 3110010222042, part number SFP4.7B1.501 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : SFP4.7B1.501 | Manufacturer : Rexnord Industries Inc | ||
| NSN Number : 3110-01-022-2042 (3110010222042) | |||
| Item Name : Bearing Roller Rod End | CAGE Code : 77896 | ||
| NIIN : 010222042 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number SFP4.7B1.501, that of which is listed with the description Bearing Roller Rod End; Manufactured by Rexnord Industries Inc and listed alongside the NSN 3110010222042, part number SFP4.7B1.501 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-022-2042 Item PartTypeName: BEARING,ROLLER,ROD END | 3110 | 010222042 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 214-001-066-001 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.6100 INCHES MINIMUM AND 0.6200 INCHES MAXIMUM |
| AAZF | SHANK STYLE | INTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 2.3600 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.2495 INCHES MINIMUM AND 0.2500 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.9700 INCHES NOMINAL |
| AGGY | SHANK THREAD LENGTH | 1.0940 INCHES MINIMUM AND 1.1540 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.3450 INCHES MINIMUM AND 0.3600 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.5880 INCHES MINIMUM AND 0.5930 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.8600 INCHES MINIMUM AND 1.8750 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYK | SHIELD QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 20 |
| CQJX | NOMINAL THREAD SIZE | 0.438 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 15.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | SLOT ACROSS FACE OF SHANK END 0.0950 IN. W 0.0720 IN. DEEP |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR SEAL |
| MATT | MATERIAL | STEEL COMP 430 SHIELD |
| MATT | MATERIAL | STEEL COMP E3310 ROD END BODY |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MATT | MATERIAL | STEEL COMP E52100 ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7393 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE ROLLER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE SHIELD |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | SINGLE ROW,CONCAVE ROLLERS |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
