| Part Number : PKB22448FH | Manufacturer : Rexnord Industries Inc | ||
| NSN : 3130-01-036-9031 (3130010369031) | |||
| Item Name : Bearing Unit Roller | CAGE Code : 19382 | ||
| NIIN : 01-036-9031 (010369031) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30558 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number PKB22448FH, that of which is listed with the description Bearing Unit Roller; Manufactured by Rexnord Industries Inc and listed alongside the NSN 3130010369031, part number PKB22448FH is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : PKB22448FH | Manufacturer : Rexnord Industries Inc | ||
| NSN Number : 3130-01-036-9031 (3130010369031) | |||
| Item Name : Bearing Unit Roller | CAGE Code : 19382 | ||
| NIIN : 010369031 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number PKB22448FH, that of which is listed with the description Bearing Unit Roller; Manufactured by Rexnord Industries Inc and listed alongside the NSN 3130010369031, part number PKB22448FH is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-036-9031 Item PartTypeName: BEARING UNIT,ROLLER | 3130 | 010369031 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 78-905644 | 5 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | 0.6250 INCHES NOMINAL |
| ABVG | MOUNTING SLOT LENGTH | 0.9375 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 3.0000 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 2.2500 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 8.1250 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 6.4375 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 10.4375 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | 3.7500 INCHES NOMINAL |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 4.3125 INCHES NOMINAL |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 3.2450 INCHES MINIMUM AND 3.2550 INCHES MAXIMUM |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 45.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| FEAT | SPECIAL FEATURES | 4 BOLT BASE |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | STEEL COMP E52100 BEARING |
| MATT | MATERIAL | STEEL HOUSING |
| MATT | MATERIAL | STEEL SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE BEARING |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK,SOLID |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
