| Part Number : PKLB78100FRT2 | Manufacturer : Rexnord Industries Inc | ||
| NSN : 3130-01-257-1078 (3130012571078) | |||
| Item Name : Bearing Unit Roller | CAGE Code : 19382 | ||
| NIIN : 01-257-1078 (012571078) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30558 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number PKLB78100FRT2, that of which is listed with the description Bearing Unit Roller; Manufactured by Rexnord Industries Inc and listed alongside the NSN 3130012571078, part number PKLB78100FRT2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : PKLB78100FRT2 | Manufacturer : Rexnord Industries Inc | ||
| NSN Number : 3130-01-257-1078 (3130012571078) | |||
| Item Name : Bearing Unit Roller | CAGE Code : 19382 | ||
| NIIN : 012571078 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number PKLB78100FRT2, that of which is listed with the description Bearing Unit Roller; Manufactured by Rexnord Industries Inc and listed alongside the NSN 3130012571078, part number PKLB78100FRT2 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-257-1078 Item PartTypeName: BEARING UNIT,ROLLER | 3130 | 012571078 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 301-23-46 ITEM 13 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | 0.750 INCHES NOMINAL |
| ABVG | MOUNTING SLOT LENGTH | 11.625 INCHES MINIMUM AND 13.125 INCHES MAXIMUM |
| ABXV | BORE DIAMETER | 100.00 MILLIMETERS NOMINAL |
| ACYB | BASE THICKNESS | 1.875 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 12.375 INCHES NOMINAL |
| ADFY | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG LENGTH | 2.375 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 8.812 INCHES NOMINAL |
| AFWD | HOUSING LENGTH | 6.500 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 15.250 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | 6.000 INCHES NOMINAL |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 4.500 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | DRAIN PLUG |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 45.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | ADAPTER |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| MATT | MATERIAL | RUBBER SYNTHETIC SEAL |
| MATT | MATERIAL | STEEL BEARING |
| MATT | MATERIAL | STEEL HOUSING |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK,OPTIONAL SPLIT |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
