| Part Number : 381-0297-010 | Manufacturer : Rockwell Collins Aerospace | ||
| NSN : 5905-00-227-7065 (5905002277065) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 13499 | ||
| NIIN : 00-227-7065 (002277065) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37407 | |||
| NCB Code : 00 | Country : USA | ||
| Alternate P/N: 3810297010 | |||
Thank you for taking an interest in part number 381-0297-010, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Rockwell Collins Aerospace and listed alongside the NSN 5905002277065, part number 381-0297-010 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
10zig technology inc
CAGE Code: 49E04 |
3 com corporation
CAGE Code: 002S5,05PN6,0DPU4,0EWG6,0H6Y3,0L086,0PGJ9,0V0C3,0ZQ35,64034 |
|
3h products co
CAGE Code: 0CJ60 |
3d
CAGE Code: 0WY47 |
|
3m company communication markets
CAGE Code: 0VGY3 |
60 degrees pharmaceuticals llc
CAGE Code: 71D06 |
|
600 cranes australasia pty ltd
CAGE Code: Z9Z76 |
2101 llc
CAGE Code: 1GH76 |
|
3m company
CAGE Code: 04963,06EF6,07WQ0,0G8N4,0J8T2,0K0U5,0KHE0,0KHE3,0L3U7,0R8C0,0T1L6,0TS02,0WJ98,0YMX0,1A9T3,1CHB0,1CM57,1DWR5,1E494,1K616,1LF36,1QDV5,27293,28112,28124,28156,28217,2H942,2K194,2V131,2Y823,34359,34360,3HUC7,50378,52152,52157,53387,54681,55203,69892,6A670,6H360,6L367,76381,7U948,94960,94962,9L291 |
3 l filters ltd
CAGE Code: 37941 |
|
3m france
CAGE Code: F0347 |
2001 humana press inc
CAGE Code: 34CH3 |
|
3gen grup trafik ltd
CAGE Code: TB427 |
3m health care service center
CAGE Code: 0UTW7 |
|
3m telecom system group
CAGE Code: 0Y7Y1 |
| Part Number : 381-0297-010 | Manufacturer : Rockwell Collins Aerospace | ||
| NSN Number : 5905-00-227-7065 (5905002277065) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : 13499 | ||
| NIIN : 002277065 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 381-0297-010, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Rockwell Collins Aerospace and listed alongside the NSN 5905002277065, part number 381-0297-010 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-00-227-7065 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 002277065 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | U | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 381-0297-010 | 3 | 9 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AAVL | PILOT DIAMETER | 0.7500 INCHES NOMINAL |
| AAVM | PILOT LENGTH | 0.1250 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 1.781 INCHES MAXIMUM |
| ABPA | UNDERCUT DIAMETER | 1.860 INCHES NOMINAL |
| ABPC | UNDERCUT WIDTH | 0.0620 INCHES NOMINAL |
| ABPM | BODY DIAMETER | 2.000 INCHES MAXIMUM |
| ABUF | ANGLE OF MOUNTING HOLE IN DEG | 60.0 |
| ABVJ | ANGLE BETWEEN CENTERLINES OF MOUNTING HOLES IN DEG | 120.0 |
| ABWV | SHAFT DIAMETER | 0.1875 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.500 INCHES NOMINAL |
| ADAQ | BODY LENGTH | 1.250 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 2.203 INCHES MAXIMUM |
| AECZ | MOUNTING LIP DIAMETER | 2.0000 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.9300 INCHES NOMINAL |
| AEDE | MOUNTING HOLE/STUD CIRCLE DIAMETER | 1.250 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 360.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 1.00 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.003 INCHES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.001 INCHES |
| AEGB | PILOT DIAMETER RUNOUT | 0.001 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| AJYN | SCREW THREAD DIAMETER | 0.164 INCHES NOMINAL |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNC |
| AJYQ | SCREW THREAD QUANTITY PER INCH | 32.0 |
| AKPV | MOUNTING FACILITY QUANTITY | 3 |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER MORE THAN HALF THE CIRCUMFERENCE |
| AXGY | MOUNTING METHOD | THREADED HOLE |
| CBBL | FEATURES PROVIDED | NONMETALLIC SHAFT |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 16.0 KILOHMS SINGLE SECTION |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.25/0.25 SINGLE SECTION |
| CQGN | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 5.0 FREE AIR SINGLE SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | SINGLE SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 SINGLE SECTION |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -1.0 TO 1.0 OHMS SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0/10.0 SINGLE SECTION |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 8000.0 SINGLE SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | SINGLE SECTION LINEAR |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION |
| TEST | TEST DATA DOCUMENT | 13499-381-0297 DRAWING (THIS IS THE BASIC GOVERNING DRAWING,SUCH AS A CONTRACTOR DRAWING,ORIGINAL EQUIPMENT MANUFACTURER DRAWING,ETC.; EXCLUDES ANY SPECIFICATION,STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRA |
| TTQY | TERMINAL TYPE AND QUANTITY | 4 TURRET |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
