| Part Number : 0377396 | Manufacturer : Rohde And Schwarz Inc | ||
| NSN : 5905-01-103-3233 (5905011033233) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : D0894 | ||
| NIIN : 01-103-3233 (011033233) | |||
| FSC Code : 5905 Resistors | |||
| FSG Code : 59 Electrical and Electronic Equipment Components | |||
| INC Code : 37405 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number 0377396, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Rohde And Schwarz Inc and listed alongside the NSN 5905011033233, part number 0377396 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 0377396 | Manufacturer : Rohde And Schwarz Inc | ||
| NSN Number : 5905-01-103-3233 (5905011033233) | |||
| Item Name : Resistor Variable Nonwire Wound | CAGE Code : D0894 | ||
| NIIN : 011033233 | |||
| FSC CODE : 5905 Resistors | |||
Thank you for taking an interest in part number 0377396, that of which is listed with the description Resistor Variable Nonwire Wound; Manufactured by Rohde And Schwarz Inc and listed alongside the NSN 5905011033233, part number 0377396 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 5905-01-103-3233 Item PartTypeName: RESISTORVARIABLENONWIRE WOUND | 5905 | 011033233 | 0 | N | B | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | B | A | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 3006P-1-103 | 3 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAPN | SECTION QUANTITY | 1 |
| AAQL | BODY STYLE | RECTANGULAR |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | 0.165 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.095 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.045 INCHES MINIMUM AND 0.075 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM |
| ADAT | BODY WIDTH | 0.180 INCHES MINIMUM AND 0.200 INCHES MAXIMUM |
| ADAU | BODY HEIGHT | 0.240 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| AEDX | SHAFT STYLE | ROUND,SLOTTED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFL | MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| AEFM | MAXIMUM STOP TORQUE | 5.00 INCH-OUNCES |
| AEHT | CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.490 INCHES MINIMUM AND 0.510 INCHES MAXIMUM |
| AGAV | END ITEM IDENTIFICATION | AN/TSC-62A |
| AXGY | MOUNTING METHOD | TERMINAL |
| AYQR | CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| CQCM | CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.190 INCHES MINIMUM AND 0.210 INCHES MAXIMUM |
| CQTM | TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| TTQY | TERMINAL TYPE AND QUANTITY | 3 PIN |
| ZZZK | SPECIFICATION/STANDARD DATA | 96238-41000450 MANUFACTURERS SOURCE CONTROL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
