| Part Number : 6863534 | Manufacturer : Rolls Royce Corporation | ||
| NSN : 3040-00-872-1000 (3040008721000) | |||
| Item Name : Gearshaft Bevel | CAGE Code : K0680 | ||
| NIIN : 00-872-1000 (008721000) | |||
| FSC Code : 3040 Miscellaneous Power Transmission Equipment | |||
| FSG Code : 30 Mechanical Power Transmission Equipment | |||
| INC Code : 60537 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number 6863534, that of which is listed with the description Gearshaft Bevel; Manufactured by Rolls Royce Corporation and listed alongside the NSN 3040008721000, part number 6863534 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : 6863534 | Manufacturer : Rolls Royce Corporation | ||
| NSN Number : 3040-00-872-1000 (3040008721000) | |||
| Item Name : Gearshaft Bevel | CAGE Code : K0680 | ||
| NIIN : 008721000 | |||
| FSC CODE : 3040 Miscellaneous Power Transmission Equipment | |||
Thank you for taking an interest in part number 6863534, that of which is listed with the description Gearshaft Bevel; Manufactured by Rolls Royce Corporation and listed alongside the NSN 3040008721000, part number 6863534 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3040-00-872-1000 Item PartTypeName: GEARSHAFT,BEVEL | 3040 | 008721000 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| EU40968 | 5 | 2 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABHP | OVERALL LENGTH | 5.105 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 5.105 INCHES NOMINAL |
| AJLA | TEETH QUANTITY | 19 |
| AJWS | GEAR OUTSIDE DIAMETER | 1.025 INCHES MINIMUM AND 1.027 INCHES MAXIMUM |
| ANJS | SHAFT END TYPE | THREADED EXTERNAL |
| AQGH | DIAMETRAL PITCH | 20.520 |
| AQPL | FACE WIDTH | 0.295 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| CRSJ | SHAFT TYPE | SHOULDERED |
| CWMW | TEETH TYPE | SPIRAL |
| CWNM | TOOTH DIRECTION | LEFT |
| CWPP | PRESSURE ANGLE | 20.0000 DEGREES |
| CWQD | PITCH ANGLE | 27.2000 DEGREES |
| CYEQ | SHAFT MATERIAL | STEEL |
| CYER | GEAR MATERIAL | STEEL |
| CYET | SHAFT LARGEST DIAMETER | 0.758 INCHES MINIMUM AND 0.759 INCHES MAXIMUM |
| CYEU | GEAR LOCATION ON SHAFT | ON END OF SHAFT |
| CYEW | SHAFT END SIZE | 0.375 INCHES |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
