Part Number : 3755 | Manufacturer : Rolls Royce Corporation | ||
NSN : 5120-00-032-9613 (5120000329613) | |||
Item Name : Holder | CAGE Code : 63005 | ||
NIIN : 00-032-9613 (000329613) | |||
FSC Code : 5120 Hand Tools Nonedged Nonpowered | |||
FSG Code : 51 Hand Tools | |||
INC Code : 77777 | |||
NCB Code : 00 | Country : USA |
Thank you for taking an interest in part number 3755, that of which is listed with the description Holder; Manufactured by Rolls Royce Corporation and listed alongside the NSN 5120000329613, part number 3755 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 3755 | Manufacturer : Rolls Royce Corporation | ||
NSN Number : 5120-00-032-9613 (5120000329613) | |||
Item Name : Holder | CAGE Code : 63005 | ||
NIIN : 000329613 | |||
FSC CODE : 5120 Hand Tools Nonedged Nonpowered |
Thank you for taking an interest in part number 3755, that of which is listed with the description Holder; Manufactured by Rolls Royce Corporation and listed alongside the NSN 5120000329613, part number 3755 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
MRC | Criteria | Characteristic |
---|---|---|
SR-5 | THE MANUFACTURERS DATA | |
SR-5 | MANUFACTURERS CODE | 24617 |
AGAV | III END ITEM IDENTIFICATION | T-56 TURBOPROP ENGINE |
TEXT | GENERAL CHARACTERISTICS ITEM DESCRIPTION | ITEM CONSISTS OF 6 7/8 IN. LG.,2 3/8 IN. WIDE,4 EA HOLES 0.375 IN. DIA,1 1/4 IN. DIA CENTRALLY LOCATED HOLE WITH 31 POINT SPLINE,2 9/16 IN. LG. AT SPLINE,5/16 IN. THICK AROUND SPLINE |
SR-5 | DESIGN CONTROL REFERENCE | 3755 |
RDAL | III REFERENCE DATA AND LITERATURE | TO 2J-T56-24; NAVAIR 02B-5DA-504 |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote