| Part Number : R450 | Manufacturer : Rosco Mfg Co | ||
| NSN : 3130-00-514-9999 (3130005149999) | |||
| Item Name : Bearing Unit Roller | CAGE Code : 51805 | ||
| NIIN : 00-514-9999 (005149999) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30558 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number R450, that of which is listed with the description Bearing Unit Roller; Manufactured by Rosco Mfg Co and listed alongside the NSN 3130005149999, part number R450 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
|
3w interface corp
CAGE Code: 4V367 |
3 d mfg inc
CAGE Code: 66484 |
|
1343080 alberta ltd
CAGE Code: L0796 |
3m touch systems inc
CAGE Code: 0A1V7 |
|
3m norge a s
CAGE Code: N0447 |
101communications inc
CAGE Code: 1WS16 |
|
21st century electronics inc
CAGE Code: 60092 |
3m telecom system group
CAGE Code: 0Y7Y1 |
|
25 canadian forces supply depot
CAGE Code: 35637 |
2001 micro systemation ab
CAGE Code: SK396 |
|
3d
CAGE Code: 0WY47 |
3e technologies international inc
CAGE Code: 1DEZ4 |
|
5dt inc
CAGE Code: 3BPF1 |
3m health care ltd
CAGE Code: U5989 |
|
4 seasons counting systems inc
CAGE Code: 0MHX5 |
| Part Number : R450 | Manufacturer : Rosco Mfg Co | ||
| NSN Number : 3130-00-514-9999 (3130005149999) | |||
| Item Name : Bearing Unit Roller | CAGE Code : 51805 | ||
| NIIN : 005149999 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number R450, that of which is listed with the description Bearing Unit Roller; Manufactured by Rosco Mfg Co and listed alongside the NSN 3130005149999, part number R450 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-00-514-9999 Item PartTypeName: BEARING UNIT,ROLLER | 3130 | 005149999 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | U | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| PB22531H | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| ABTD | MOUNTING SLOT WIDTH | 0.6250 INCHES NOMINAL |
| ABVG | MOUNTING SLOT LENGTH | 1.1250 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 1.9375 INCHES NOMINAL |
| ACYB | BASE THICKNESS | 1.6875 INCHES NOMINAL |
| ADFX | CENTER TO CENTER DISTANCE BETWEEN MOUNTING HOLES ALONG WIDTH | 7.0000 INCHES NOMINAL |
| AFWC | HOUSING HEIGHT | 4.8750 INCHES NOMINAL |
| AFWE | HOUSING WIDTH | 9.2500 INCHES NOMINAL |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGNF | BASE LENGTH | 2.3750 INCHES NOMINAL |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 2 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | 3.8125 INCHES NOMINAL |
| AKRF | SEAL TYPE | LABYRINTH |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | BOTH ENDS |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| ANKP | HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE | 2.5000 INCHES NOMINAL |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | 45.0 DEGREES NOMINAL |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | SLOTTED |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | IRON CAST HOUSING |
| MATT | MATERIAL | STEEL COMP E52100 BEARING |
| MATT | MATERIAL | STEEL SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE BEARING |
| STYL | STYLE DESIGNATOR | PILLOW BLOCK,SOLID |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
