| Part Number : JTE60248 | Manufacturer : Rotating Precision Mechanisms Inc | ||
| NSN : 3130-01-600-0428 (3130016000428) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 54547 | ||
| NIIN : 01-600-0428 (016000428) | |||
| FSC Code : 3130 Bearings Mounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 30556 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number JTE60248, that of which is listed with the description Bearing Unit Ball; Manufactured by Rotating Precision Mechanisms Inc and listed alongside the NSN 3130016000428, part number JTE60248 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : JTE60248 | Manufacturer : Rotating Precision Mechanisms Inc | ||
| NSN Number : 3130-01-600-0428 (3130016000428) | |||
| Item Name : Bearing Unit Ball | CAGE Code : 54547 | ||
| NIIN : 016000428 | |||
| FSC CODE : 3130 Bearings Mounted | |||
Thank you for taking an interest in part number JTE60248, that of which is listed with the description Bearing Unit Ball; Manufactured by Rotating Precision Mechanisms Inc and listed alongside the NSN 3130016000428, part number JTE60248 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3130-01-600-0428 Item PartTypeName: BEARING UNIT,BALL | 3130 | 016000428 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | 0 | ||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| 723B16 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AGKL | Lubrication Fitting Type | FLUSH |
| SFTT | Surface Treatment | CHROMIUM RACE |
| MATT | Material | RUBBER SYNTHETIC SEAL |
| MATT | Material | STEEL COMP E52100 BALL |
| AGAV | End Item Identification | ELECTRONIC WARFARE EQUIPMENT, NONAIRBORNE |
| MDCL | Material Document And Classification | AVON SPEC NUMBER BES 2-1-054, AISI 1552 MFR REF SINGLE MATERIAL RESPONSE RACE |
| LMDC | Lubrication Material Document And Classification | MIL-C-G-23827 MIL SPEC SINGLE MATERIAL RESPONSE |
| CXCY | Part Name Assigned By Controlling Agency | BEARING ASSY |
| MDCL | Material Document And Classification | AISI S2100 ASSN STD SINGLE MATERIAL RESPONSE BALL |
| LBMA | Lubrication Material | GREASE |
| FEAT | Special Features | OUTSIDE DIA 26.125; CONTAINS 64 (.75 DIA) BALLS; TWO 1/8-27 NPT GREASE FITTINGS ARE LOCATED 180 DEG APART (RECEASED BELOW OD) TO INTERSECT WITH THE VERTICAL 1/8-27 NPT LUBE HOLES; HARDNESS RATING OF RACES 24-32 RC, BALLS 63-66RC, RACEWAY INDUCTION 58-63RC; HAS INV STUB TOOTH FORM, PITCH DIA 19, DIAMETRAL PITCH 8, PRESSURE ANAGLE 20 DEG, 152 TEETH, HARDNESS 24-32RC, CIRCULAR TOOTH THICKNESS 0.1963-0.1948; EACH RACE IS 2.0 INC HIGH, THEY DON'T ALIGN LEVEL, ENTIRE ASSEMBLY IS 2.50 HIGH |
| MATT | Material | STEEL RACE |
| CWGR | Lubrication Fitting Angle From Horizontal Centerline | 0.0 DEGREES NOMINAL |
| ABXV | Bore Diameter | 18.850 INCHES MINIMUM AND 18.856 INCHES MAXIMUM |
| MRC | Decoded Requirement | Clear Text Reply |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
