Part Number : 211700 | Manufacturer : Royal Oak Gage Inc | ||
NSN : 5310-00-373-8412 (5310003738412) | |||
Item Name : Nut Plain Cap | CAGE Code : 00088 | ||
NIIN : 00-373-8412 (003738412) | |||
FSC Code : 5310 Nuts and Washers | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 01855 | |||
NCB Code : 00 | Country : USA |
Thank you for taking an interest in part number 211700, that of which is listed with the description Nut Plain Cap; Manufactured by Royal Oak Gage Inc and listed alongside the NSN 5310003738412, part number 211700 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 211700 | Manufacturer : Royal Oak Gage Inc | ||
NSN Number : 5310-00-373-8412 (5310003738412) | |||
Item Name : Nut Plain Cap | CAGE Code : 00088 | ||
NIIN : 003738412 | |||
FSC CODE : 5310 Nuts and Washers |
Thank you for taking an interest in part number 211700, that of which is listed with the description Nut Plain Cap; Manufactured by Royal Oak Gage Inc and listed alongside the NSN 5310003738412, part number 211700 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5310-00-373-8412 Item PartTypeName: NUT,PLAIN,CAP | 5310 | 003738412 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
211700 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAJD | THREAD CLASS | 3B |
AAJF | THREAD DIRECTION | RIGHT-HAND |
AAWY | COUNTERBORE DIAMETER | 0.375 INCHES MINIMUM NUT AND 0.405 INCHES MAXIMUM NUT |
ACTA | NUT STYLE | CAP |
ADEA | NUT HEIGHT | 0.568 INCHES MINIMUM AND 0.588 INCHES MAXIMUM |
AGGP | DRILLED HOLE DIAMETER | 0.065 INCHES NOMINAL |
ALET | HOLE TYPE AND QUANTITY | 2 DRILLED |
ASDB | WIDTH ACROSS FLATS | 0.618 INCHES MINIMUM AND 0.627 INCHES MAXIMUM |
BZRR | THREAD SERIES | UNEF |
CMLP | THREAD QUANTITY PER INCH | 32 |
CQFM | HARDNESS RATING | 25.0 ROCKWELL C MINIMUM AND 33.0 ROCKWELL C MAXIMUM |
CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
CRHC | HOLE CONFIGURATION STYLE | CONFIGURATION B |
CRSQ | COUNTERSINK ANGLE | 55.0 DEGREES MINIMUM NUT AND 65.0 DEGREES MAXIMUM NUT |
CRTM | BEARING SURFACE TYPE | WASHER FACED |
MATT | MATERIAL | STEEL COMP 410 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS 5613 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote