| Part Number : AS21151 | Manufacturer : Sae International | ||
| NSN : 3110-01-116-9309 (3110011169309) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 0U583 | ||
| NIIN : 01-116-9309 (011169309) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00049 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number AS21151, that of which is listed with the description Bearing Ball Rod End; Manufactured by Sae International and listed alongside the NSN 3110011169309, part number AS21151 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AS21151 | Manufacturer : Sae International | ||
| NSN Number : 3110-01-116-9309 (3110011169309) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 0U583 | ||
| NIIN : 011169309 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number AS21151, that of which is listed with the description Bearing Ball Rod End; Manufactured by Sae International and listed alongside the NSN 3110011169309, part number AS21151 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-01-116-9309 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 011169309 | 0 | N | ||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | |||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| MS21151-6C | 6 | 9 | 5 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.2500 INCHES NOMINAL |
| AAZF | SHANK STYLE | EXTERNALLY THREADED |
| ABHP | OVERALL LENGTH | 2.2020 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.1897 INCHES MINIMUM AND 0.1900 INCHES MAXIMUM |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.7710 INCHES MINIMUM AND 0.7900 INCHES MAXIMUM |
| AGGY | SHANK THREAD LENGTH | 0.0907 INCHES MINIMUM AND 0.0962 INCHES MAXIMUM |
| AGVT | OUTER RING WIDTH | 0.4280 INCHES MINIMUM AND 0.4480 INCHES MAXIMUM |
| AGVU | INNER RING WIDTH | 0.4950 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.8020 INCHES MINIMUM AND 1.8220 INCHES MAXIMUM |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AHAW | SELF-ALIGNMENT LOCATION | INTERNAL |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CQJX | NOMINAL THREAD SIZE | 0.250 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| FEAT | SPECIAL FEATURES | 80 PCT FULL OF SPECIFIED LUBRICANT; NAS 513 KEYWAY IN SHANK |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-81322 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | PLASTIC POLYTETRAFLUOROETHYLENE OR PLASTIC POLYTETRAFLUOROETHYLENE AND GLASS FIBER SEAL |
| MATT | MATERIAL | STEEL COMP 301 RETAINER |
| MATT | MATERIAL | STEEL COMP 4130 ROD END BODY |
| MATT | MATERIAL | STEEL COMP E52100 BALL |
| MATT | MATERIAL | STEEL COMP E52100 INNER RING |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | 66 FED STD SINGLE MATERIAL RESPONSE RETAINER |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | AMS3652 ASSN STD 1ST MATERIAL RESPONSE OR AMS3666 ASSN STD 2ND MATERIAL RESPONSE SEAL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-6758 MIL SPEC SINGLE MATERIAL RESPONSE ROD END BODY |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE BALL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7420 MIL SPEC SINGLE MATERIAL RESPONSE INNER RING |
| SFTT | SURFACE TREATMENT | CADMIUM ALL EXTERNAL/EXPOSED METAL SURFACES |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 1,CL 2 FED SPEC SINGLE TREATMENT RESPONSE ALL EXTERNAL/EXPOSED METAL SURFACES |
| STYL | STYLE DESIGNATOR | DOUBLE ROW,STAGGERED,BALL |
| THSD | THREAD SERIES DESIGNATOR | UNJF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
