| Part Number : AEM02012 | Manufacturer : Saint Gobain Performance Plastics | ||
| NSN : 4720-01-464-0411 (4720014640411) | |||
| Item Name : Tubing Nonmetallic | CAGE Code : 1DS07 | ||
| NIIN : 01-464-0411 (014640411) | |||
| FSC Code : 4720 Hose and Flexible Tubing | |||
| FSG Code : 47 Pipe Tubing Hose and Fittings | |||
| INC Code : 31934 | |||
| NCB Code : 01 | Country : USA | ||
Thank you for taking an interest in part number AEM02012, that of which is listed with the description Tubing Nonmetallic; Manufactured by Saint Gobain Performance Plastics and listed alongside the NSN 4720014640411, part number AEM02012 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : AEM02012 | Manufacturer : Saint Gobain Performance Plastics | ||
| NSN Number : 4720-01-464-0411 (4720014640411) | |||
| Item Name : Tubing Nonmetallic | CAGE Code : 1DS07 | ||
| NIIN : 014640411 | |||
| FSC CODE : 4720 Hose and Flexible Tubing | |||
Thank you for taking an interest in part number AEM02012, that of which is listed with the description Tubing Nonmetallic; Manufactured by Saint Gobain Performance Plastics and listed alongside the NSN 4720014640411, part number AEM02012 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 4720-01-464-0411 Item PartTypeName: TUBING,NONMETALLIC | 4720 | 014640411 | 0 | N | A | |
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | A | A | 0 | |||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| AEM02012 | 5 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| CQBD | BURST TEST PRESSURE | 280.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| ABJH | TEMP RATING | -100.0 DEG FAHRENHEIT AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| MATT | MATERIAL | PLASTIC POLYURETHANE TUBE |
| CQBC | MINIMUM TENSILE STRENGTH | 6050 POUNDS PER SQUARE INCH |
| AGAV | END ITEM IDENTIFICATION | 6115-01-435-1565; GENERATOR SET, DIESEL ENGINE; P/N 95-531 |
| ADJS | EXTERIOR COLOR | CLEAR |
| CQGM | MAXIMUM OPERATING PRESSURE | 56.0 POUNDS PER SQUARE INCH SINGLE RESPONSE |
| FEAT | SPECIAL FEATURES | MAXIMUM WORKING PRESSURE, RE MRC CQGM 56.0 AND BURST PRESSURE, RE MRC CQBD PSI AT 73 DEG FAHRENHEIT, MIN BEND RADIUS 0.625, INSIDE DIAMETER.188 INCHES, OUTSIDE DIAMETER 0.312 INCHES, WALL THICKNESS 0.062 INCHES, ULTIMATE ELONGATION PCT 500, TENSILE STRESS AT 300 PCT ELONATION PSI 1550, BRITTLE POINT DEG F. NEGATIVE 100,TEAR RESISTANCE, LBF IN 475, HIGH TEMPERATURE LIMIT DEG F. INTERMITTENT 200.0, ECTION PCT 68, TENSILE SET AT 75 PCT ELONGATION PCT 98, ABRASIONRESISTANCE, MG LOST 1,000 CYCLES EQUALS |
| FLEX | (NON-CORE DATA) FLEXIBILITY | FLEXIBLE |
| AASF | NONMETALLIC HARDNESS RATING | 82.0 NOMINAL SHORE DUROMETER A |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
