| Part Number : HRBH4E1FN | Manufacturer : Sargent Aerospace | ||
| NSN : 3110-00-928-1644 (3110009281644) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 97613 | ||
| NIIN : 00-928-1644 (009281644) | |||
| FSC Code : 3110 Bearings Antifriction Unmounted | |||
| FSG Code : 31 Bearings | |||
| INC Code : 00049 | |||
| NCB Code : 00 | Country : USA | ||
Thank you for taking an interest in part number HRBH4E1FN, that of which is listed with the description Bearing Ball Rod End; Manufactured by Sargent Aerospace and listed alongside the NSN 3110009281644, part number HRBH4E1FN is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| Part Number : HRBH4E1FN | Manufacturer : Sargent Aerospace | ||
| NSN Number : 3110-00-928-1644 (3110009281644) | |||
| Item Name : Bearing Ball Rod End | CAGE Code : 97613 | ||
| NIIN : 009281644 | |||
| FSC CODE : 3110 Bearings Antifriction Unmounted | |||
Thank you for taking an interest in part number HRBH4E1FN, that of which is listed with the description Bearing Ball Rod End; Manufactured by Sargent Aerospace and listed alongside the NSN 3110009281644, part number HRBH4E1FN is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
| NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
|---|---|---|---|---|---|---|
| 3110-00-928-1644 Item PartTypeName: BEARING,BALL,ROD END | 3110 | 009281644 | N | |||
| CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
| U | ||||||
| Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
| HRBH4E1FN | 6 | 2 | 3 |
| MRC | Criteria | Characteristic |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAZE | SHANK DIAMETER | 0.3750 INCHES NOMINAL |
| ABHP | OVERALL LENGTH | 2.2810 INCHES NOMINAL |
| ABXV | BORE DIAMETER | 0.2520 INCHES NOMINAL |
| ADGA | OVERALL OUTSIDE DIAMETER | 0.8750 INCHES NOMINAL |
| AGGY | SHANK THREAD LENGTH | 1.1250 INCHES NOMINAL |
| AGVT | OUTER RING WIDTH | 0.3320 INCHES NOMINAL |
| AGVU | INNER RING WIDTH | 0.5000 INCHES NOMINAL |
| AGXH | LENGTH FROM BORE CENTER TO SHANK END | 1.8120 INCHES NOMINAL |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CQJX | NOMINAL THREAD SIZE | 0.375 INCHES |
| CTLK | SELF-ALIGNMENT ANGLE | 10.00 DEGREES NOMINAL |
| LBMA | LUBRICATION MATERIAL | GREASE |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL-G-3278 MIL SPEC SINGLE MATERIAL RESPONSE |
| MATT | MATERIAL | STEEL SHAFT |
| SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
| THSD | THREAD SERIES DESIGNATOR | UNF |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote
