Part Number : 914441 | Manufacturer : Sasco Inc | ||
NSN : 5310-00-276-2997 (5310002762997) | |||
Item Name : Washer Spring Tension | CAGE Code : 58275 | ||
NIIN : 00-276-2997 (002762997) | |||
FSC Code : 5310 Nuts and Washers | |||
FSG Code : 53 Hardware and Abrasives | |||
INC Code : 15938 | |||
NCB Code : 00 | Country : USA |
Thank you for taking an interest in part number 914441, that of which is listed with the description Washer Spring Tension; Manufactured by Sasco Inc and listed alongside the NSN 5310002762997, part number 914441 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
Part Number : 914441 | Manufacturer : Sasco Inc | ||
NSN Number : 5310-00-276-2997 (5310002762997) | |||
Item Name : Washer Spring Tension | CAGE Code : 58275 | ||
NIIN : 002762997 | |||
FSC CODE : 5310 Nuts and Washers |
Thank you for taking an interest in part number 914441, that of which is listed with the description Washer Spring Tension; Manufactured by Sasco Inc and listed alongside the NSN 5310002762997, part number 914441 is available for immediate purchase on our website. As such, to learn more about this offering while receiving a competitive quote for your comparisons, be sure to fill out and submit the RFQ form presented on this page. Within 15 minutes of us receiving and reviewing a completed form, a member of our staff will contact you to present a tailored solution for your comparisons.
NSN | FSC | NIIN | CLS | Hazmat | DEMIL | Cancelled NSN |
---|---|---|---|---|---|---|
5310-00-276-2997 Item PartTypeName: WASHER,SPRING TENSION | 5310 | 002762997 | 0 | N | ||
CIIC | HCC | ESD | PMIC | Criticality | ENAC | |
U | U | |||||
Part Number | ISC | RNVC | RNCC | HCC | MSDS | SADC |
191003 | 2 | 2 | 3 |
MRC | Criteria | Characteristic |
---|---|---|
AAUB | HOLE DIAMETER | 0.535 INCHES MINIMUM AND 0.540 INCHES MAXIMUM |
ABKV | OUTSIDE DIAMETER | 0.807 INCHES MINIMUM AND 0.817 INCHES MAXIMUM |
ABKW | OVERALL HEIGHT | 0.090 INCHES MINIMUM AND 0.110 INCHES MAXIMUM |
ABPX | MATERIAL THICKNESS | 0.020 INCHES NOMINAL |
CQFM | HARDNESS RATING | 40.0 ROCKWELL C MINIMUM AND 48.0 ROCKWELL C MAXIMUM |
MATT | MATERIAL | STEEL COMP 1065 OVERALL |
MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | SAE ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
SFTT | SURFACE TREATMENT | CADMIUM OVERALL |
We hope that you will visit us again the next time you need board-level components, aviation and aerospace parts, and more. Allow us to serve as your strategic purchasing partner.
Request for Quote